Welcome

TCP/IP Package For TSX-Plus Documentation

-... Client / Server Program Options


File Transfer Client Program The FTP program provides reliable data transfer between cooperating computer systems. The FTP program startup options are: FTP [?] [-f filename] [-p filename] [-ghinrv] [destination host] ? List this Help Text and Exit FTP f filename Command File g Wildcard Expansion Disabled h FTP Help List i Interactive Prompting Off n AutoLogin Disabled on Connect p filename Specify the Password Filespec r Output Redirection Disabled v Verbose Mode Disabled The destination host specification may be the host name or host ip number. If the connection is to be made to an alternate port then follow the name/ip with the port number (decimal). If the work file device, wf:, is not assigned then the pro- gram will fail to execute the commands mget, mdel, or mls. The FTP startup command file is: run/single TCP:ftp -hbp PAS:/paswrd.dsk/paswrd.fil ^1 ^2 ^3 ^4 ^5 ^6 The FTP program supports the following command line options: ? print local help information ascii set ascii transfer type bell toggle command completed beep bget get a file in binary mode binary set binary transfer type bput put a file in binary mode bye terminate ftp session and exit cd change remote working directory close terminate ftp session debug toggle/set debugging mode delete delete remote file - inquires if prompting is on dir list contents of remote directory get receive file hash toggle printing `#' for each 1024 bytes transferred help print local help information home set default directory to home interactive turn on prompting for multiple commands lcd change local working directory ldelete delete local files ldir list contents of local directory lls list contents of local directory lmkdir make a local directory lprotect set protection flag on local file lpwd show local working directory lrename rename a local file lrmdir remove a local directory ls list contents of remote directory ltype print a local file to the screen lunprotect clear protection flag on a local file mdelete delete multiple files mdir list contents of multiple remote directories mget get multiple files mkdir make directory on the remote machine mls list contents of multiple remote directories mode set file transfer mode mput send multiple files noninteractive turn off prompting on multiple commands open connect to remote ftp passive enable or disable passive transfer mode prompt toggle interactive prompting on multiple commands protect set protection flag on file put send one file pwd print working directory on remote machine quit terminate ftp session and exit quote send arbitrary ftp command recv receive file remotehelp get help from remote server rename rename remote file rm delete remote file rmdir remove directory on the remote machine send send one file sendport toggle use of PORT cmd for each data connection status show current status struct set file transfer structure system query remote system type type print a remote file to the screen unprotect clear protection flag on file user send new user information verbose toggle verbose mode version FTP-11 version displayed wild toggle wildcard expansion of local file names > <filespec> redirect (m)dir or (m)ls response to a file The commands bget, get, put, and send allow explicit renaming of the files during the transfer by specifying the optional destination file name: bget/get/put/send [source name] [destination name]
=> Section Index

File Transfer Client Program (little) The FTPL program provides reliable data transfer between cooperating computer systems. FTPL is a stripped version of the FTP program for use on smaller systems. The FTPL program startup options are: FTPL [?] [-p filename] [-ghinrv] [destination host] ? List this Help Text and Exit FTPL g Wildcard Expansion Disabled h FTPL Help List i Interactive Prompting Off n AutoLogin Disabled on Connect v Verbose Mode Disabled The destination host specification may be the host name or host ip number. If the connection is to be made to an alternate port then follow the name/ip with the port number (decimal). If the work file device, wf:, is not assigned then the pro- gram will fail to execute the commands mget, mdel, or mls. The FTPL startup command file is: r/single ftpl -hb -p sy:/paswrd.dsk/paswrd.fil ^1 ^2 ^3 ^4 ^5 ^6 The FTPL program supports the following command line options: ? print local help information ascii set ascii transfer type bell toggle command completed beep bget get a file in binary mode binary set binary transfer type bput put a file in binary mode bye terminate ftp session and exit cd change remote working directory close terminate ftp session debug toggle/set debugging mode delete delete remote file - inquires if prompting is on dir list contents of remote directory get receive file hash toggle printing `#' for each 1024 bytes transferred help print local help information interactive turn on prompting for multiple commands mdelete delete multiple files mget get multiple files mkdir make directory on the remote machine mode set file transfer mode mput send multiple files noninteractive turn off prompting on multiple commands open connect to remote ftp passive enable or disable passive transfer mode prompt toggle interactive prompting on multiple commands put send one file pwd print working directory on remote machine quit terminate ftp session and exit quote send arbitrary ftp command recv receive file remotehelp get help from remote server rename rename remote file rm delete remote file rmdir remove directory on the remote machine send send one file sendport toggle use of PORT cmd for each data connection status show current status struct set file transfer structure system query remote system type type print a remote file to the screen user send new user information verbose toggle verbose mode version FTPL-11 version displayed wild toggle wildcard expansion of local file names The commands bget, get, put, and send allow explicit renaming of the files during the transfer by specifying the optional destination file name: bget/get/put/send [source name] [destination name]
=> Section Index

File Transfer Server Program RFTP is a server program for remote FTP sessions into TSX-Plus. The program startup options are: RFTP [?] [-hmp filespec] [-aeruvyz] ? List the Help Text and Exit RFTP a Attach to Service e Monitor all RFTP Transactions h Specify the Help Filespec m Specify the Message Filespec p Specify the Password Filespec r Restart RFTP after Disconnect u UNIX Style DIR Command v Verbose Mode y s Login Timeout in seconds z s Inactivity Timeout in seconds The program may be started interactively (for diagnostic pur- poses) by the command file RFTP.COM: run/single TCP:rftp -rpyz PAS:/paswrd.dsk/paswrd.fil 15 600 ... ... ^1 ^2 ^3 ^4 ^5 ^6 The program is normally invoked by the TCPIP network server pro- gram by the command file RFTP.SRV: deassign dismount ld0: dismount ld1: dismount ld2: dismount ld3: dismount ld4: dismount ld5: dismount ld6: dismount ld7: assign sy: wf: mount ld6: dl1:paswrd.dsk assign ld6: PAS: mount ld7: dl1:tsxtcp.dsk assign ld7: TCP: run/single TCP:rftp -aspyz 0 4 PAS:paswrd.fil 15 600 The RFTP help and message files are RFTP.HLP and RFTP.MSG respectively. The h or m options may be used if these files are not on the TCP: device. These files are created by the system manager and are not required. The command file RFTHLP.COM uses the subdirectories utility LDISKS to create a logical disk map for inclusion in the RFTP.HLP file. The -u option specifies that the 'LIST' command returns a UNIX style directory listing rather than the default RT-11 style directory format. This format is useful if the remote systems are PC's using one of the window oriented FTP utilities such as PROCOMM V3.0 (DataStorm Technologies). These utilities use the unix access-rights string to determine whether the entries are files or directories. The general form for the UNIX style directory is: -rwxrwxrwx 1 system user 1536 12 Jan 96 file.ext drwxrwxrwx 1 system user 512000 01 Mar 96 subdir.dsk
=> Section Index

... Exit TCP/IP Documentation

... Home Page