HP-2116A chassis (or repairing cast aluminum)
Tim at rikers.org
Sat Apr 16 23:29:52 CDT 2005
Bob Shannon wrote:
> I have two 2116's, a 2116A, and a 2116C.
> In your position, I'd contact Larry at Crisis Computer, and arrange to get
> one of the parted-out 2116 hulks from his shop at a parts donor.
Good advice. I'll drop him and email.
> The parts your looking for should be reasonable, I don't think there is
> much demand for chassis parts.
>> From the photo's, it looks like your core stacks are missing. Is this
I recovered what I could find. I have no idea what's missing yet. any
feedback is appreciated. All the cards that came in the chassis are
still in there in the pictures. There are a few loose cards I found that
I'm not sure which HP they were used in. A fuzzy picture of them here:
Those don't look to include the cards in question. Anyone want to look
through the pics and estimate what I'd need to get the box running? The
existing card labels are readable on the fullsize version of:
These were removed and I have them:
2 large heatsink modules
front door (minus glass over register display, missing power button)
3 fans from bottom with metalwork
broken bits of chassis
plus these two cards were loose (top two):
labeled 02116-6014 and 02116-6015
Tim Riker - http://rikers.org/ - TimR at Debian.org
Embedded Linux Technologist
BZFlag maintainer - http://BZFlag.org/ - for fun!
More information about the cctalk