Mini Jumpers for 68 pin SCSI drives
John Boffemmyer IV
john_boffemmyer_iv at boff-net.dhs.org
Wed Nov 2 10:48:24 CST 2005
Did you try NewardinOne (Newark Electronics) or Allied Electronics or
even Mouser Electronics?
I'm quite sure at least 2 of them have the jumpers.
-John Boffemmyer IV
At 11:18 AM 11/2/2005, you wrote:
>James Rice wrote:
>>Teo Zenios wrote:
>>>Anybody know of a cheap source for mini jumpers for SCSI HD's? I looked in
>>>my parts box and I have quite a few of the normal sized jumpers but none of
>>>the minis and need a dozen or two for a SCSI tower I am working on.
>>>The drives I am using are all factory set to ID 6 (IBM drives) and don't
>>>have any jumpers at all on ID select pins. I assume that once you jumper the
>>>apropriate pins it will overide the factory settings? The SCSI tower has the
>>>normal sized ID select cabled and they are too large to fit the drives so I
>>>need to do it via jumpers.
>>Fry's usually carries them. They run around $4 a bag of 20 or so.
>The store John Boffemmyer used to work for had 10 for 70 cents.
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.362 / Virus Database: 267.12.7/156 - Release Date: 11/2/2005
More information about the cctalk