Reverse Engineering 15 yr old electronics
jce at seasip.demon.co.uk
Sun Nov 13 13:07:27 CST 2005
Paul Koning <pkoning at equallogic.com> writes:
: The only way I can think of is to take a large piece of paper, draw
: the components (ICs, etc.), then trace each etch on the PCB. You
: might use a felt tip pen to put a dab of color on each pin whose
: connection you have marked on your drawing.
If you've got a digital camera, take pictures of both sides of the PCB,
and you can then draw on the pictures using a graphics program.
More information about the cctalk