Gordon JC Pearce
gordonjcp at gjcp.net
Thu Nov 17 14:00:28 CST 2005
> M7270 +5V at 1A +12V at .22A
> M8043 +5V at 1A +12V at .25A 4 serial ports
> M8027 +5V at 1.2A +12V at .1A 2 serial ports, MXV11AC 32kb ram +Eprom
> The M7270 is the LSI11/2 CPU (16bit address) and the MXV11 multifunction
> card are a near complete system on two cards. You would only need a Tu58
> equiventlt on the secod serial port to boot or some disk (RXV21) to have
> a system in three boards.
Yeah... I haven't got the manuals kicking about just now (or rather I
do but I've got a ton of things to do before digging them out) but that
sounds "doable". Say 30 watts all in - about the same as a decent
laptop. A card with a bit more RAM, and maybe a PIC and a CF card to
emulate MSCP, and it's done.
Just a little bigger footprint than my Libretto, too...
More information about the cctalk