Cooling and leaks; was: removing parts from PCBs
cclist at sydex.com
Mon Nov 21 15:40:47 CST 2005
On 11/21/2005 at 12:55 PM Eric J Korpela wrote:
>The drawbacks of this system are that you need to prime it, and that a bad
>enough leak will disrupt the coolant flow, so you need to monitor the flow
>rate or have a decent thermal shutdown mechanism. You need that in case of
>pump failure, anyway.
Why not simply use a standard sump pump? Most such pumps can push a 15 or
20 foot head and don't need to be primed.
More information about the cctalk