American Automation emulators?
rigdonj at cfl.rr.com
Wed Apr 26 20:29:08 CDT 2006
Actually I'm just guessing that these are emulator boards. I'm not
positive what they are.
I have several of these but ot the machine that they go into, just the
pods and interface boards. The pods that are attached to interface boards
with two ribbon cables. There's also a short ribbon cable that connects to
the pod and to a DIP plug that looks like it's supposed to replace a CPU.
The pods are in metal box about 10 x 7 inches square and slightly over an
inch thick. The bottom over on the pod is hinged and you can open it up and
see the emulator card. This card is marked 6800/02/08. The interface card
is about 6 x 10 inches square and has female connectors that are made to
fit over small male pins. I don't know the name of these connectors but it
looks like the same connectors that used on the SS-50 computer cards. I'll
try to get some pictures tomorrow.
At 05:06 PM 4/26/06 -0700, you wrote:
>Joe R. wrote:
>> Is anyone familar with this stuff? I picked up a pile of it a week or
>>two back. The pod that I'm looking at right now if for the 6800/02/08 but I
>>think the others are for other CPUs. Anyone know what system it's for? The
>>interface board uses the same type female connectors as the ss-50 stuff but
>>many more pins and much larger circuit card. I found some mentions on the
>>net but nothing useful.
>I work for arium. What do you have? We are now American Arium, and
>I can at least find out what you have it you send photos or descriptions.
>I suspect maybe you either have an analyzer with some trace pods, or
>if you have run control, you may have an EZ/Pro system.
More information about the cctalk