joseph c lang
jclang at notms.net
Wed Aug 2 13:12:47 CDT 2006
On Wednesday 02 August 2006 12:07, you wrote:
> I'm just curious; I picked up a PDP 11/05 last weekend, but instead of the
> processor cards laying on their sides, these were standing up. This
> resulted in a configuration with two other plastic covers (one about 1"
> high below the standard 11/05 front panel, and the other about 7" above the
> front panel.) Is this a standard or optional chassis for the 11/05? I also
> picked up the dual cassette drive (no cassettes or software yet though), so
> it looks like a nice little system.
Sounds like you are describing the 11/05 10" system unit.
It's a standard chassis. 11/05S IIRC
It has a 1 rack unit panel below the front panel.
And a 3 rack unit panel above the front panel.
It has the power supplies along the right side (if you're facing the front
A 9 slot backplane and room for 2 or 3 additional 4 slot backplanes.
The docs for it are on bitsavers
More information about the cctalk