TU-58 connection to 11/03?

[Richard]

In article <f4eb766f0602011111m1e211247jbde7efc07fa81dee at mail.gmail.com>,
    Ethan Dicks <ethan.dicks at gmail.com>  writes:

> I was talking about a DLJ11-V - a 4-port dual-height card that was
> common in 11/03s and dual-height 11/23 systems (KDF-11A)... one port
> was strapped to be the console, and the other three had "standard"
> addresses that meant that in a typical system, you only had to worry
> about baud rate and parity jumpers to put the card to full use.

IIRC, I have the console port on one card and a printer port on a
second card.  I'll have to make a list of the module numbers and
update my collection web page so I can remember this stuff without
access to the HW ;-).
-- 
"The Direct3D Graphics Pipeline"-- code samples, sample chapter, FAQ:
          <http://www.xmission.com/~legalize/book/>
             Pilgrimage: Utah's annual demoparty
                <http://pilgrimage.scene.org>