Pertec interface

[Richard]

In article <43C6CE61.1090205 at msm.umr.edu>,
    jim stephens <jwstephens at msm.umr.edu>  writes:

> There are scsi to pertec interfaces, but were rare, and therefore 
> probably if you
> found one, would also come with someone wanting to sell the tape drive it is
> attached to.
> 
> There are PDP-11 pertec controllers.  Same with Sun3 multibus - VME.  I
> had a fujitsu 2444 which came from a sun 3/280, and it had a multibus in the
> sun VME adapter frame.
> 
> PCI/ISA includes Overland Data if you can find the controller.  I had 
> trouble
> running the 2444 on the Overland TXI, so be warned on that.

So it sounds like the best bet is to try and find a controller for the
Sun 3/110 that I have.  (Particularly since this is a drive that was
sold for Sun systems.)  Does anyone have a part/model number for the
Sun 3 VME controller?
-- 
"The Direct3D Graphics Pipeline"-- code samples, sample chapter, FAQ:
          <http://www.xmission.com/~legalize/book/>
             Pilgrimage: Utah's annual demoparty
                <http://pilgrimage.scene.org>