RX02 and intel hex file tools
henk.gooijen at oce.com
Sun Jan 29 03:07:16 CST 2006
I am not sure if this might help:
- Henk, PA8PDP.
Van: cctalk-bounces at classiccmp.org namens C H. Dickman
Verzonden: zo 29-01-2006 04:10
Aan: cctalk at classiccmp.org
Onderwerp: RX02 and intel hex file tools
I am building an eprom adapter for a DEC Unibus M9301 bootstrap
terminator so I can use 8bit wide 2732 eproms in place of the 4bit wide
fuse proms. The goal is to boot RX02 disks which the M9301 roms don't
Are there any good unix tools for manipulating intel hex files or any
binary image files?
I have the M9312 boot/diagnostic prom images which are intel hexfile. I
modified Eric Smith's program so that I could obtain intel hexfile
images of the proms that are not scrambled for the M9312.
I need to join them and then create an image file so that my DataIO 201
burner will accept them. The burner can accept intel, motorola and
tektronix formats. I have used the intel format, but not the other two
with this burner.
A quick search found srecord which claims to manipulate various formats,
but is written in C++ (which I don't speak) and does not compile in
Linux (Fedora Core 3).
Basically, I need to take several binary images (now in intel hex), move
them to a different address, join them together, and then burn them on
This message and attachment(s) are intended solely for the use of the addressee and may contain information that is privileged, confidential or otherwise exempt from disclosure under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by telephone and with a "reply" message.
Thank you for your cooperation.
More information about the cctalk