Amiga Workbench 3.1 ROMS

[Teo Zenios]

----- Original Message ----- 
From: "Roger Merchberger" <zmerch-cctalk at 30below.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Sent: Monday, June 19, 2006 1:20 PM
Subject: Re: Amiga Workbench 3.1 ROMS


> Rumor has it that Adrian Graham may have mentioned these words:
> >Hi Folks,
> >
> >Has anyone got a set of Workbench 3.1 ROMs they'd be willing to part with
> >for less than epay and internet vultures want for them? My A4000 needs
them
> >so I can install OS3.9 and get instant accelerator action :)
>
> I have a late model 4000T (technically offtopic - built in '98) with I
> *believe* 3.1 Roms in it - tearing it apart now...
>
> =-= away from computer, leatherman in hand... =-=
>
> Visually confirmed - I have 3.1 Roms in it, and they're socketed.
>
> If you can tell me the chip and/or pinout, I can tell you if I have any
> chips in stock to burn.
>
> Now, I have a question:
>
> I have the bog-standard A3640 Rev 3.1 CPU card (25Mhz 68040) in mine -
will
> this card support a 33Mhz CPU if I swap the 50Mhz oscillator with a 66Mhz?
>
> Thanks!
> Roger "Merch" Merchberger
>
> --
> Roger "Merch" Merchberger  --  SysAdmin, Iceberg Computers
> zmerch at 30below.com

Does anybody own the right to those Amiga ROMs anymore and actively sell
them (not talking about a shop with old stocks from when Commodore was still
around)?