Looking for a BA-356 jumper

[Ed Groenenberg]

Hello Adrian,

I know, I got the docu from a webpage, but I only have a terminator.
It misses the jumber board in order to continue the bus on the 2nd half.

Regards,

Ed

>
> On Sat, September 30, 2006 1:28 pm, Ed Groenenberg said:
>>
>> I got a BA-356 with 6 drives ad it came with a dual channel
>> personality module.
>>
>> I want to use it as a single channel tray, and according to
>> the user guide it needs a jumper connector.
>
> Hi Ed,
>
> The BA356 has its jumper and terminator already installed behind the
> blowers, though that it has a dual channel personality module doesn't
> necessarily mean the shelf is a split-bus one. If you've powered it up and
> it's spun up drives 0, 2, 4 then 1,3,5 etc you just need to swap the
> terminator and jumper boards. Remove the blowers on the back and the
> jumper cover at the bottom (metal box, it's a pig to remove :o)) then swap
> the boards over.
>
> If I was thinking straight I could tell you how to check which board is
> connected where by removing the drives and looking at the backplane, maybe
> someone else will do that for me :)
>
> cheers
>
> --
> adrian/witchy
> Binary Dinosaurs creator/curator
> www.binarydinosaurs.co.uk - the UKs biggest home computer collection?
>