CompuPro floppy controller differences

[Allison]

>
>Subject: RE: CompuPro floppy controller differences
>   From: "Richard A. Cini" <rcini at optonline.net>
>   Date: Sat, 09 Sep 2006 13:59:08 -0400
>     To: "'General Discussion: On-Topic Posts Only'" <cctech at classiccmp.org>
>
>All:
>
>	I looked at the CompuPro disk image on Dave Dunfield's site and it's
>for an 8" drive. The defining thing for me is getting a CP/M 2.2 image in
>5.25" format. I've found another controller, from CCS (California Computer
>Systems) that might work, too. So does anyone have a 5.25" CP/M 80 image for
>either of these two boards?
>
>	Thanks.
>
>Rich

All my CCS disks are 8" I'd have to look to see if the controller even did 
5.25 it's been so long.  I do remember the CCS used a banking scheme that
didn't agree with most of my systems.


Allison