wall wart for TI-58-C

[Stan Barr]

Hi,
 
Mike Loewen said:
> On Thu, 11 Jan 2007, Stan Barr wrote:
> 
> > I don't know if the -C is the same, but my TI-58 (no -C) requires
> > 6.2V ac @ 200mA.  There are rectifier diodes in the calculator so
> > the supply can be connected either way round.
> 
>     I just checked my TI-58C, and it does indeed take a 3.3VAC 500ma power 
> pack.  The links I posted earlier agree.  The connector is keyed.  The 
> part number is AC-9131.  Are you sure that's the right pack, Stan?  The 
> references say the TI-58 uses the same AC-9131 pack.

I had to go and find it* first, but the wall-wart definitely says
6.2V / 200mA  Model AC9900/H-UK and is the one that came with it
when I bought it new way back when.  The connector is keyed, but it
didn't need to be, the supply is definetly ac.

I've got it on charge now, and it still works fine - it's seen a 
lot of use, it's on it's 3rd battery pack!

* Searching had the useful side-effect of my finding my Sinclair
Programmable Calculator, I'll get a battery later and see if that 
still works.


-- 
Cheers,
Stan Barr  stanb at dial.pipex.com

The future was never like this!