Pictures of My Machine Room (So Far)

[Allison]

>
>Subject: Re: Pictures of My Machine Room (So Far)
>   From: Fred Cisin <cisin at xenosoft.com>
>   Date: Sun, 17 Jun 2007 13:00:53 -0700 (PDT)
>     To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
>

Fred Cisin writes:
>
>OB_CC: Where can you get plywood that matches the Northstar Horizon?
>The "home" stores don't even have the right thickness!
>

That grade is for real carpentry not home despot wonder projects.

The stuff used was real 3/4" finish grade with what appears to be oak 
veneer (mine is).  The originals were fairly tough veneer and well 
fitted.  Mitered corners and two cleats in the corner for a bit of 
stiffness.  The front edge has a routed slot on the inside top and 
two sides to slide over the front pannel plate, The slot is 9/64 
maybe 5/32" wide.  Most of the early machines came with the dark 
stain wood but I'd like to find a metal one (less RFI). 

One of my NS* Horizon is wood cover and the other is missing the 
cover so I have a Lexan cover plate to allow airflow.


Allison