11/45 progress

Guy Sotomayor ggs at shiresoft.com
Wed Mar 14 19:58:57 CDT 2007

Jay West wrote:
> Along those same lines... The system did have a KW11-P. According to 
> the docs the LTC needs to be connected to that slot for the KW11-P to 
> use. I should also see if it was wired for that. Isn't there some 
> issue like you can't have multiple cards connected to the LTC? 
> Something about overloading the circuit that generates it in the power 
> supply? I recall something about it being very critical no more than 
> ONE M7856 was set for LTC use. If that is the case, I assume you 
> couldn't also have the KW11-P set to use LTC if one of the M7856's was 
> set to use it? Foggy memory here...
Yes, only one thing on the LTC.  There's a transistor in the power 
supply that is "unhappy" (ie you'll be opening up that power supply 
again) if you put more than one load on the LTC line.


TTFN - Guy

More information about the cctalk mailing list