BA23 setup and DZQ11 configuration

[Allison]

>
>Subject: Re: BA23 setup and DZQ11 configuration
>   From: "Ethan Dicks" <ethan.dicks at gmail.com>
>   Date: Wed, 21 Mar 2007 12:18:57 -0400
>     To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
>
>On 3/21/07, Allison <ajp166 at bellatlantic.net> wrote:
>> I wrote
>> > Dave has nowhere to stuff a ROM.  The KDJ11-A board is dual-height and
>> > is a CPU only
>>
>> I'm using a KDJ11A and it boots RX02/RL02/MSCP devices with the right
>> jumper setup. If memory serves the dual width J11 baord has rom on baord
>> for standard device boot. My Docs for that board are burried.
>
>I think you must have your boot ROM on another board in your system...
>
>http://www.ibiblio.org/pub/academic/computer-science/history/pdp-11/hardware/micronotes/numerical/micronote39.txt
>
>-ethan

It's possible since I configured that system nearly 10 years ago and it 
hasn't been opened since save for cleaning the fans.  The only board that
could have a boot rom would be the RQDX3.  I'll have to check net time 
I clean the fans.


Allison