11/45 lower regulator board
ard at p850ug1.demon.co.uk
Sat Mar 24 18:34:42 CDT 2007
> Hey, that thing is hard to get to! Someone tightened down the screws in the
It's a right pain, isn't it!
> back that hold the regulator in place, so after undoing the two screws in
> front it still won't slide out. Is there a trick to this? Do I have to take
> the whole supply out? Can't get a screw driver in there with the upper H742
> in place :\
Getting the H742 supplies out is a pain too, due to the fan wiring. You
have to unbolt the fans, drop them into the space where the 'bricks' go,
and then disconenct the wiring from each fan.
I seem to remeber unscrewing the _top_ H742 supply from the rack and
moving it out of the way without disconnecting the fan wires (I think I
had to unplug some of the mate-n-lock connectors). Then I could get to
the screws in the lower supply.
There are, of course, screwdrivers designed to work in such spaces,
including ones with bevel gearboves in them. Is it possible to use
something like that to get at said screws?
More information about the cctalk