BA23 setup and DZQ11 configuration

[Allison]

>
>Subject: Re: BA23 setup and DZQ11 configuration
>   From: David Betz <dbetz at xlisper.com>
>   Date: Tue, 27 Mar 2007 13:29:38 -0400
>     To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
>
>> A good substitute for RX50 is an RX33 (aka TEAC FD55GFR) or  an FD55F
>> setup as non1.2mb.  RX50 drives are actually two platters but one head
>> positioner and they are 96TPI like the mentioned FD55F or G.  These  
>> work
>> fine with RQDX2/3 as a RX50 substitute.  I have one configured that  
>> way.
>
>Allison,
>
>Thanks for your suggestion. I amend my previous request. Does anyone  
>have a Teac FD55GFR that they can spare? :-)
>
>Actually, I have one myself but it is installed in a DECmate III+  
>machine that I didn't want to cannibalize. I guess I could remove it  
>temporarily to install software on my PDP-11 and then replace it  
>later. But, if anyone has either an RX33 (FD55GFR) or an RX50 they  
>can spare, please let me know what you would want in return.
>
>Thanks,
>David

I can give you one of each if you like.

Allison