VT100 board horrors !

Gerold Pauler gerold.pauler at gmx.net
Sat Apr 26 10:14:06 CDT 2008


These are no VT100s these are VT101s,
so nobody cut off the card edge connectors.
A vt100 board looks like this:
http://pdp8.de/en/frames/set_vt100.html

Just my 2c
 Gerold (pdp8.de)

Am Do, den 24.04.2008 schrieb Richard um 22:52:
> In article <m1Jp7u1-000J1jC at p850ug1>,
>     ard at p850ug1.demon.co.uk (Tony Duell)  writes:
> 
> > > Check out e-bay 280220921661 . . .
> > > 
> > > VT100 logic boards, that someone decided to cut the card-edge 
> > > connectors off of. . .
> > 
> > Well, it's sad, BUT...
> > 
> > At least these boards have not been scrapped. They are (presumably) a 
> > source of the ROMs, the 2 ASICs, and so on. Which could all be used to 
> > fix non-working VT100s. 
> > 
> > Personally, I can't think a time when I'd need a complete VT100 logic 
> > board. I mean there can't be that many VT100s around without such a board 
> > in them, can there??? And if the origianl board is still there, it's 
> > repairable using bits from these gold-harvested boards.
> 
> If you need the edge connectors, they are in this lot 280220935641
> 
> :-)
> -- 
> "The Direct3D Graphics Pipeline" -- DirectX 9 draft available for download
>       <http://www.xmission.com/~legalize/book/download/index.html>
> 
>         Legalize Adulthood! <http://blogs.xmission.com/legalize/>
-- 
Gerold Pauler			Tel.:  +49 30 75 70 42 78
Katharinenstr. 7		Mobil: +49 173 23 49 440
10711 Berlin			eMail: gerold.pauler at gmx.net




More information about the cctalk mailing list