HP64000 System, Books, Software available

Steven Hirsch snhirsch at gmail.com
Sun Aug 3 14:39:35 CDT 2008


With a heavy heart and ever-diminishing storage space, I'm going to part 
with my HP64000 development system.  This is a soup-to-nuts setup including:

- HP64000 desktop unit (all-in-one w/ keyboard and floppy drives)

- External HPIB hard disk (from an HP9000, i.e. physically small)

- CPU Pods for 68000, 68010, Z80, 8085, 8088 and 8051.  I do not have the
   interface boards for everything and have never used them.  Some look to
   be brand new.

- More interface and emulation boards (for internal card frame) than I
   know what to do with.  Spares for just about everything.

- Several EPROM programmer adapters (mount in main system unit).

- Tape drive mechanism (internal mount, was replaced by diskette drives)

- Two 4ft. shelves full of manuals - hardware and software

- Complete cross-assembler and cross-compiler software for every 1978-1982
   CPU you have ever heard of and perhaps some you haven't.  Probably 2-3
   linear feet of 5-1/4" diskettes, most the original distribution media.

The last time I fired it up, the main unit worked fine.  It boots from the 
attached HPIB drive and was able to access the floppy drives without 
error.

I won't even consider shipping it, you will need to pick it up in 
Burlington, VT and must take everything with you.

Note that I haven't mentioned price.  That's because there isn't any. 
Terms are simple:  Free to the first person who makes arrangements with me 
for pickup and appears at my door.

Steve


-- 


More information about the cctalk mailing list