Suggestions for VT103?

[Ethan Dicks]

On Sun, Dec 28, 2008 at 9:07 PM, Sridhar Ayengar <ploopster at gmail.com> wrote:
> Ethan Dicks wrote:
>>
>> What you are after is rosin-core lead-based solder around 60/40 or
>> 63/37 tin/lead, with a diameter around 0.5mm (.020") to 0.8mm (.032").
>
> I highly recommend 63/37 over 60/40.  I find it easer to work with.

Sure, but I'd never _not_ do a project because all I had on hand was
60/40, though.

-ethan