Q-bus to CF [was: IOmega]

[Sridhar Ayengar]

Gordon JC Pearce wrote:
> Exactly.  Simply grafting a PATA interface onto a QBus card is trivial.
> Actually getting something that will either pretend to be an existing
> controller or writing a device driver for the operating system in use is
> much much harder.
> 
> If you really wanted to push this forwards, write me some MSCP
> controller firmware for an Atmel microcontroller...

I have the skillset to do this.  What I don't have is the documentation 
that would allow me to figure out how to talk MSCP and bit-bang Qbus. 
If someone could point me in the right direction for the specs for 
these, I'd be happy to write the firmware.

Peace...  Sridhar