inexpensive prototype boards with 22-44 pin edge connector

Andrew Lynch lynchaj at yahoo.com
Fri Jan 4 10:46:38 CST 2008



Sandy's Electronics here in Reno has a bunch $1.00 each, these are the
vellman boards and some telecom boards.  20 slot backplanes to match too.
www.sandyselectronicparts.com
Randy

> From: mcguire at neurotica.com
<http://www.classiccmp.org/mailman/listinfo/cctalk> 
> Date: Fri, 4 Jan 2008 10:44:20 -0500
> To: cctech at classiccmp.org
<http://www.classiccmp.org/mailman/listinfo/cctalk> 
> CC: 
> Subject: Re: inexpensive prototype boards with 22/44 pin edge connector
> 
> On Jan 4, 2008, at 6:51 AM, Roy J. Tellason wrote:
> >> Does anyone know where to get some inexpensive prototype boards with 
> >> the
> >> 22/44 pin edge connectors?
> >>
> >> I am looking for something like DATAK or VELLEMAN boards preferably 
> >> under
> >> $10 a piece.
> >>
> >> I have looked but have not been able to find any.  Any hints would be 
> >> much
> >> appreciated.
> >
> > I too would be interested in these.   They used to be really common,  
> > and
> > could even be found at radio shack for a while,  but not these days...
> >
> > Small prototyping boards in general are of interest to me,  with or 
> > without
> > the edge connector for that matter.
> 
>    Same here; if anyone finds a good source for decent prototyping 
> boards, please post it.
> 
>             -Dave
> 
> --
> Dave McGuire
> Port Charlotte, FL
> 






-----REPLY-----

Thanks Randy!

Andrew Lynch




More information about the cctalk mailing list