Iomega card documentation...

[Chuck Guzis]

On 25 Sep 2008 at 13:54, Gene Buckle wrote:

> Can someone point me to where I can find the settings for this card? Even 
> Total Hardware 99 comes up short.

Dunno about the PC800 specifically, but it was packaged with Zip 
drives for a short time.  An .INF file from the Iomega driver pack 
shows the following:

[With_IRQ]             ;Secondary Configuration
ConfigPriority=HARDRECONFIG
IOConfig=280-28f(3ff::),290-29f(3ff::),300-30f(3ff::),310-
31f(3ff::),330-33f(3ff::),340-34f(3ff::),348-357(3ff::),350-
35f(3ff::)
IRQConfig = 7,3,4,5

Apparently, the default was no interrupt.  Given that you now know 
the range of I/O port addresses and the possible interrupt numbers, 
perhaps it's possible to figure the jumpers out by probing I/O ports 
a little.

Cheers,
Chuck