DEQNA/DELQA cab kit with DEUNA/DELUA?

[J Blaser]

On Sun Sep 7 12:35:44 CDT 2008, James A. Markevitch said:

> From the DEUNA print set ...
> 
> The transceiver cable connects the following signals from the DEUNA to
> the AUI connector:
> 
>     1   Power
>     4   Power return
>     6   Receive+
>     7   Receive-
>     10  Transmit+
>     11  Transmit-
>     14  Collision+
>     15  Collision-
>     20  Fuse low

This is great information.  Thanks!

Just checked the DELQA printset which gives the following for the
20-pin BERG:

1 Power
2 (key, pin blocked)
4 Power Return
6 Receive +
7 Receive -
10 Transmit +
11 Transmit -
12 Shield
14 Collision +
15 Collision -
18 Control out circuit A
19 Control out circuit B
20 Fuse OK

which seems to agree entirely with the DEUNA information you
have.  This is good news!


> In addition, the other pins on the DEUNA connector are:
> 
>     2   Power (same as pin 1)
>     3   Power return (same as pin 4)
>     5   Ground
>     8   Ground
>     9   Ground
>     12  Ground
>     13  Ground
>     16  Ground
>     17  Open
>     18  Open
>     19  Open

Okay, very nice to know this.


> I'll try to get a chance to scan the DEUNA print set this week and send it
> over to bitsavers.

That would be great!  I don't think there is any particular urgency,
now that I have the BERG pinouts, but I'm sure the community
at large (and me) would appreciate having that online somewhere
in the future.

Many thanks!

- Jared