LA30 - anyone got one?

[Tom Uban]

M H Stein wrote:
> ---------------Original Message:
> Date: Mon, 06 Apr 2009 07:50:29 -0500
> From: Tom Uban <uban at ubanproductions.com>
> Subject: Re: LA30 - anyone got one?
> 
> 
> I have an LA30 in my collection, although it isn't easily accessible
> at the moment. Unfortunately, the LA30 uses a non-standard paper width,
> or perhaps it was standard at the time and just isn't anymore. This
> combined with immovable tractor feeds make getting paper for it difficult.
> 
> --tom
> ---------------Reply:
> Any idea what the actual width is? I'm about to throw out a few boxes
> of pinfeed paper of various sizes; maybe some is useful after all.
> 

Ok. You peaked my curiosity enough to climb over a bunch of junk and
take a measurement. I didn't remember exactly right as the width of
the paper used by the LA30 is wider (not narrower) than normal. The
distance between the tractor pins on the LA30 is 9-3/8" and on normal
paper it is 8-15/16"...

If you have a box of the "non-standard" paper, I am interested! :-)

--tom