Recommendations for IMSAI-compatible RAM cards?

[Josh Dersch]

Thanks everyone for all the suggestions and advice.  I'll keep my eyes 
peeled for some good SRAM cards (a few people on the list have offered, 
so I'm off to a good start!).

Thanks again!
Josh

Chuck Guzis wrote:
> Depends on how "vintage" you want to be and the speed of your CPU.
>
> For a couple of years, I used the SSM 8K SRAM boards (64 x 21L02)--
> but that was on a 2MHz Z80.  Later, I used a 64K DRAM board (Digital 
> Research: Computers, I think) that used 4116s and worked all right.
>
> What I would not recommend is the early DRAM boards (e.g., the MITS 
> 4K boards).  They can be very flakey, even when when they were new.
>
> If in doubt, stick with SRAM--fewer timing issues.
>
> As another poster has noted, the CompuPro boards were good.
>
> Cheers,
> Chuck
>
>
>
>
>
>