Classic mac fun (and some questions) (continued...)

[Brian Lanning]

On Fri, Jun 19, 2009 at 11:38 AM, Brian Lanning<brianlanning at gmail.com> wrote:
> On Thu, Jun 18, 2009 at 10:46 AM, Brian Lanning<brianlanning at gmail.com> wrote:
>>> Make sure that the SCSI chain is properly terminated.  If you're using
>>> internal and external devices, confirm that both ends are terminated
>>> properly and neither end is double terminated.   Check the SCSI IDs being
>>> used by all devices on the chain.
>
> There was a resistor pack (looked like an IC) on the hard drive, but
> it wasn't seated correctly.  I pushed it in, but no change.  I'll keep
> looking.


It was the disk.  I have a new 7.6.1 cd that's currently booting.  It
worked the first try.  :-)

Thanks for the help.  We'll see how far I get this time.

brian