What's needed for a minimal HP-1000 series E/(F?) system?

[J. David Bryan]

On Wednesday, March 11, 2009 at 21:22, Josh Dersch wrote:

> All but columns G and H are populated, so here goes:
> 
> Column A: 5180-0141, 5180-0142, 5180-0143
> Column B: 12823-80019, 12823-80020, 12823-80021
> Column C: 12824-80007, 12824-80008, 12824-80009
> Column D: 92067-80001, 92067-80002, 92067-80003
> Column E: 1816-1301, 1816-1303, 1816-1304
> Column F: 1816-1305, 1816-1306, 1816-1307

Hmmm...those last two sets are puzzling.  I can't find any record of those 
part numbers.

Would you please note the DIP switch settings to the right of the chips in 
columns E and F (when the card is oriented so that the ejectors are on the 
right side) and report them back to the list?  That will give us the 
microcode addresses, and that might give us a lead as to the option 
identities.

                                      -- Dave