Hazeltine 1500 screen garbage; ideas?

[John Floren]

On Wed, Mar 25, 2009 at 5:24 PM, Gordon JC Pearce <gordonjcp at gjcp.net> wrote:
> John Floren wrote:
>
>> The thing is, I'm not really sure where that wire is supposed to go...
>> does it just need to stick on to the side in some way, which is why
>> the solder probably broke in the first place?
>
> It looks like it might be part of the clamp that holds the cores together,
> but it's kind of hard to tell...
>
> Gordon
>
>

If it's not clear from the picture, the end of the wire is stripped
and bent a bit, then covered with a big blob of solder. Should I try,
say, using electrical tape to stick it back on the side and give
things a shot? If you look closely at
http://csplan9.rit.edu/users/john/hazeltine/hazeltine-0005.jpeg it
kinda looks like the wire was just stuck on there with the solder
blob.


John
-- 
"I've tried programming Ruby on Rails, following TechCrunch in my RSS
reader, and drinking absinthe. It doesn't work. I'm going back to C,
Hunter S. Thompson, and cheap whiskey." -- Ted Dziuba