Re-installing a TouchTone keypad in an ASR-33

Dave Caroline dave.thearchivist at gmail.com
Sat May 16 17:20:35 CDT 2009


looks like I have to do some digging and maybe scanning
http://www.collection.archivist.info/searchv10.php?searchv4page=1&errlev=0&searchstr=asr
is what I have somewhere at home

Dave Caroline

On Sat, May 16, 2009 at 11:15 PM, Ethan Dicks <ethan.dicks at gmail.com> wrote:
> Hi, All,
>
> I know I've mentioned this long-outstanding project before, but just
> this week, I've had a couple of nudges towards getting it done...
> First, Will Donzelli stopped by on his Eastward Progress to deliver
> some PDP-8 gear to me, and in the process of showing him around my
> Farm, I pointed out this ASR-33 w/110 bps modem in the pedestal.
> Second, I just found the box of telephone parts with two pre-IC-era
> touchtone keypads, one of which I'm positive I removed from the TTY
> years ago when I was tearing it apart (in ignorance) to attempt to
> remove the modem, etc., and make it a viable console TTY for my
> (first) PDP-8/L.
>
> So... what I still lack is proper documentation to know how to install
> the TouchTone pads.  I'm thinking it'll be much easier these days to
> find a PDF than it ever would have to find real paper in the 1980s
> when I bought the TTY at Dayton.
>
> My question (for now) is... how I can tell which of these two keypads
> is likely to be the right unit.  They are superficially identical, but
> one has 7 wires, the other 11 as follows...
>
> Both: Green, Red, Black, White, Blue/White, Black/Orange, Red/Green
> One: Purple, Blue, Orange, White/Green
>
> There is what appears to be a date-code on the bobbin transformers on
> the 7-wire pad of 3-77 vs 12-80 on the 11-wire pad.  If that _is_ a
> date code, I'd wager the 3-77 unit is from the ASR-33 simply because I
> don't think I would have been able to pick up a 3-4-year-old ASR-33 at
> Dayton for $35 or so, but I can believe that a 7-8-year-old unit could
> have been that cheap.  OTOH, I can see how a data device might need a
> more complicated keypad (there appear to be additional levels of
> switches compared to the simpler one, thus it suggests where the extra
> 4 wires are going).
>
> I'm thinking that I probably just loosened the screw terminals in the
> ASR-33 and removed the keypad to either get it out of the way or
> because I thought I might recycle it into something else.  Now, give
> that I know there are differences other than the modem in the one TTY,
> I'm probably unlikely to attempt to convert it to a 6-wire
> console-capable TTY, and would like to restore the modem-equipped TTY
> to its original functionality.
>
> Does anyone on the list know of a good resource for 1970s-1980s
> telephone techology that is available (i.e., not something that
> Western Electric/Lucent is sitting on that's for internal use only)?
> I have PDFs for the mechanical bits of an ASR-33; those have been
> floating around for some time (and I have them on paper, too, that
> came with my console-capable TTY).  I lack any
> modem-equipped-model-specific docs.  Those would be most helpful, as I
> could reinstall the TouchTone pad in a few minutes once I knew what
> wires go where.
>
> Thanks for any tips and pointers.
>
> -ethan
>



More information about the cctalk mailing list