Stuff to dispense with pt 1.
pontus at Update.UU.SE
Fri Apr 16 00:06:40 CDT 2010
Where are you located? I'm to far away, but I would like to forward part
of you message to the nekochan forum (SGI affectionados might like the
On Thu, Apr 15, 2010 at 05:25:27PM -0400, Patrick Finnegan wrote:
> This is what I'm attempting to get rid of from my warehouse. I would
> like to get something for the machines, but mostly want to make sure
> that the stuff doesn't get scrapped. Everything is assumed to work, but
> I have no guarantees that it does, and it hasn't been turned on in quite
> a while, but it has been stored in a climate-controlled warehouse. I'm
> open to some trades, and negotiable on prices for most stuff. I'm not
> willing to ship anything myself, but may be willing to drop it off
> somewhere to be shipped - I mostly don't have time to pack this stuff.
> Email me for more info on any of this stuff.
> For the most part, this stuff needs to be gone by May 14th- when I leave
> for Dayton Hamvention. I may be able to bring smaller (desktop box)
> stuff with me, but larger stuff I won't be able to transport to the show
> with everything else I'm bringing. Some of the stuff will start
> disappearing at the end of next week via scrap or eBay if I don't hear
> anything by then.
> + VAX 8700 w/ TU-81+ and SA482. Haven't had a chance to power up, and
> will keep this if I don't get a good offer. Want around $500 for it.
> + DG Nova 2 w/ PERTEC 9-track tape drive and dual 8" floppy.
> Asking $750, this will go to eBay if I don't get any takers.
> + DG Nova 4. Have 3 or 4, some missing the front-panel. 3rd party
> Disk/QIC tape rackmount box that goes with them.
> + BA-11 10.5" tall UNIBUS expansion boxes. $25 each
> + SGI Onyx prototype machine. The same size and chassis as a Challenge
> XL. $100
> + PDP-11/23 w/RL02s in corporate cab. $200
> + RM-02 drives. I have 4, want to keep at least one. Never had much
> luck getting them to work with my RH-11 on my 11/84, but I don't think
> there's anything wrong with the drives themselves. $200 each
> + VAX 4000/200. I have two or 3 of these. $100 each
> + DEC CMR53. 2 of these. A pdp-11/53 system with some special
> communications cards in them. $100 each
> + AlphaServer 4100. $20
> + Various VAXstation 3100s for whatever I can get for them
> + 4 tape drives from IBM 3480-B22 tape units. I've considered saving
> this for spares, but I'm not sure I care enough.
> + IBM S/390 G5 coupling facility. I'd really like to find the
> replacement software for the SE to make it into a "standard" CPU, so
> that I can at least run Linux on it, but I'm not sure that's likely.
> + Encore Mulitmax UNIX box. 32 x NS32332 processors and 128MB ram, and a
> 2nd rack with a 9-track tape drive and some 8" hard disks. $250.
> + General Automation SPC16/40 and 16/45. Missing the front panel for
> one of the two, have an I/O box, and PSUs. needs some repair work. One
> of the PSUs needs new capacitors. Will keep unless I can get $500 or so
> for the both of them.
> + HP 1000 E-series, I think. Two of these. $200 each?
> + IBM RS/6000 SP. I've got one frame with quad-375MHz POWER3-II thin
> nodes, and one high node (16GB ram, 16 x 375MHz). $200
> + DEC VT240 terminals. Probably 10. $5 each
> + IBM 9343-C02 DASD box. I have someone interested, but haven't heard
> from them in a while, and am not sure how interested they really are ...
> I'd like to get $100 for it.
> + Two Amiga 2000 Video Toaster boxes. I may end up keeping one. $100.
> + Various IBM UNIX desktop systems, desktop VAXes, etc. $5 each.
> + Altos 8000 and 8600 systems. $10 each.
> + Tektronix 4010 terminal. $100.
> + Tullamore/Victoreen SCIPP 1600 1600-channel pulse-height analyzer.
> Powers up, but not tested much more than that. Looks cool, and has CORE
> memory inside. $50. Some pics I took a while ago:
> That's all I can recall for now.
> Purdue University Research Computing --- http://www.rcac.purdue.edu/
> The Computer Refuge --- http://computer-refuge.org
More information about the cctalk