Simulated telephone

[Tony Duell]

> 
> On Thu, Aug 26, 2010 at 2:02 PM, Tony Duell <ard at p850ug1.demon.co.uk> wrote:
> > Alas not. It was made by a company called 'Computer Devices Inc' and
> > claims to be a 'Miniterm 1203' Does anyone have any more infoemtion?
> 
> No information to speak of, but I do have the same or similar model:
> 
> http://www.flickr.com/photos/chiclassiccomp/455415489/in/set-72157606520513168/

Yes, that looks very like it. Do you have the cover? Mine has a plastic 
cover that hooks into 2 little brackets at the back and then comes down 
over the whole machine with latches at the front. There's a carrying 
handle on the front too, and you can store it standing vertically with 
the bck downwards. There's a littke compartment in the cover over the 
keybaord where yoy can store a spare roll of paper, a mains lead and an 
RS232 cable. 

> 
> I'll have to check for a numeric model # when I get home.  IIRC I had
> this one working off the coupler at some point.

I am going to have to dive into mine again. I rememebr there being a 
couple of sets of jumpers (DIL headers with wires soldered between the 
pins) and I never figured out what they do

-tony