Code for programmer

[dwight elvey]

Hi Christian

 Thanks, I just found that site as well

after looking through a few hundred search

results.

 I also saw a post by someone that seemed

to think that the labtool-48 should also work with

the PC-UPROG but I'm not as sure. I uploaded it

anyway just to see if it did.

 The file PC-UPROG.ZIP comes with a nice file

converter as well. It looks like it will convert

most of the formats but it is not to clear there.

There is one of the parameters that it doesn't

describe. I'll have to play with it. It does at

least do HEX to binary( not that writing such

a program is too hard, I've done it a several times).

It is nice to have all the converters in one program.

 I don't know if the programmer that I got

even works. I'll check it out this weekend. I

hope it does. I think it will be an upgrade from

my EMP-10( that blow an buffer occational chip ). 

Dwight


 
> Date: Thu, 28 Jan 2010 10:49:42 +0100
> From: cc at informatik.uni-stuttgart.de
> To: cctalk at classiccmp.org
> Subject: Re: Code for programmer
> 
> On Wed, 27 Jan 2010, dwight elvey wrote:
> > Does anyone have code for a PC-UPROG by Advantech?
> 
> Yes, the most recent version in here:
> http://support.elmark.com.pl/programatory/AEC/PCUPROG/pcuprog.zip
> 
> Christian
 		 	   		  
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/196390709/direct/01/