HP 9825 tape drive

[Rik Bos]

Please neglect this one !
-Rik 

> -----Oorspronkelijk bericht-----
> Van: cctalk-bounces at classiccmp.org 
> [mailto:cctalk-bounces at classiccmp.org] Namens Rik Bos
> Verzonden: dinsdag 2 maart 2010 19:50
> Aan: 'General Discussion: On-Topic and Off-Topic Posts'
> Onderwerp: HP 9825 tape drive
> 
> I modified a HP 9825A tape drive for use with QIC 40/80 tapes.
> It's a rather easy conversion building a new capstand wheel 
> witch is a little higher so it can drive the QIC tapes and 
> increasing the write current by replacing a the current 
> limiter resistor.
> It's under test and at the moment seems to work.
> I was curious if there others who did the same and what 
> theire experiances are...
>  
> -Rik