would this work?

[Rik Bos]

> -----Oorspronkelijk bericht-----
> Van: cctalk-bounces at classiccmp.org 
> [mailto:cctalk-bounces at classiccmp.org] Namens Brian Lanning
> Verzonden: donderdag 4 maart 2010 6:19
> Aan: General Discussion: On-Topic and Off-Topic Posts
> Onderwerp: would this work?
> 
> Forgive my lack of hardware knowledge...
> 
> What if I took this:
> 
> http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=31020161623
> 2&rvr_id=&crlp=1_263602_263622&UA=WVF%3F&GUID=fbd9ae461220a043
7161e4b1ffdf44f7&itemid=310201616232&ff4=263602_263622
> 
> Desoldered the female ISA connector, then soldered it to the 
> underside of a passive backplane.  Would I have goofy 
> reliability problems?  Would it even work?
> 
> brian

If I understand you right, you're soldering the ISA connector to the bottom
of another ISA connector.
If so, all the signals are mirrored on the ISA connector you soldered on the
backside, it woudn't work just smoke ;-)

-Rik