September 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Thu Sep 1 02:24:48 CDT 2011
Ending: Fri Sep 30 23:03:20 CDT 2011
Messages: 1268

• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• Apple II over-current issue   Mike van Bokhoven
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• mess.org   Alexandre Souza - Listas
• mess.org   Dave McGuire
• mess.org   Glen Slick
• mess.org   Dave McGuire
• mess.org   Adrian Stoness
• Apple II over-current issue   Pete Turnbull
• RQDX3 DEVOFFLINE Problems   Pete Turnbull
• mess.org   feldman.r at comcast.net
• Train shipping ( was Re: VT fixums )   Jonas Otter
• DEC GIGI (again)   Tony Duell
• Apple II over-current issue   Tony Duell
• Apple II over-current issue   Tony Duell
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Tony Duell
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• Apple II over-current issue   Tony Duell
• Apple II over-current issue   Mike van Bokhoven
• Apple II over-current issue   Tony Duell
• Apple II over-current issue   Tony Duell
• DEC GIGI (again)   allison
• Apple II over-current issue   Mike van Bokhoven
• Apple II over-current issue   Mike van Bokhoven
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Fred Cisin
• Apple II over-current issue   Pete Turnbull
• DEC GIGI (again)   jim s
• Apple II over-current issue   Mike van Bokhoven
• Intel MDS available in SC   Alexey Toptygin
• Adrian's PDP-8 paper tapes, was Re: mess.org   Dave McGuire
• Adrian's PDP-8 paper tapes, was Re: mess.org   Adrian Stoness
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Adrian Stoness
• Intel MDS available in SC   dwight elvey
• Apple II over-current issue   Terry Stewart
• SunOS booting woes (was Re: Looking for SunOS 4.1.* (sun3) cd image)   Josh Dersch
• Adrian's PDP-8 paper tapes, was Re: mess.org   Dave McGuire
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• Adrian's PDP-8 paper tapes, was Re: mess.org   Adrian Stoness
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Adrian Stoness
• Apple II over-current issue   Pete Turnbull
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• SunOS booting woes (was Re: Looking for SunOS 4.1.* (sun3) cd image)   Josh Dersch
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Adrian Stoness
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Colin Eby
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• Apple II over-current issue   terry stewart
• RQDX3 DEVOFFLINE Problems   Rick Murphy
• Apple II over-current issue   Mike van Bokhoven
• Tony Sale passed   Jules Richardson
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Toby Thain
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Jason McBrien
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   John Foust
• RQDX3 DEVOFFLINE Problems   Jack Rubin
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Colin Eby
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Al Kossow
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Rich Alderson
• Apple II over-current issue   Tony Duell
• Apple II over-current issue   Tony Duell
• Apple II over-current issue   Tony Duell
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Tony Duell
• Apple II over-current issue   Adam Sampson
• mess.org   MikeS
• TRS-80 Model II Digging   Nathan Pralle
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• Apple II over-current issue   Tony Duell
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Adrian Stoness
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Al Kossow
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Pete Turnbull
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)   Toby Thain
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• HP 7470A plotter -- repairing/replacing paper feed rollers   Philip Pemberton
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Andrew Burton
• DiscFerret disc analysers for sale!   Philip Pemberton
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   ben
• DiscFerret disc analysers for sale!   Al Kossow
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• DiscFerret disc analysers for sale!   Philip Pemberton
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Tony Duell
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Tony Duell
• DiscFerret disc analysers for sale!   Chris M
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• RQDX3 DEVOFFLINE Problems   Tony Duell
• Early 3D rendition   Pontus
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Adrian Stoness
• WTB/Trade Tadpole/Sparc parts   Gavin Thomas Nicol
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Richard
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Adrian Stoness
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Andrew Burton
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   ben
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Toby Thain
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Dave McGuire
• HP 7470A plotter -- repairing/replacing paper feed rollers   Philip Pemberton
• Old printer tricks, HP LaserJet 6P   vintagecoder at aol.com
• Old printer tricks, HP LaserJet 6P   Charles E. Fox
• Old printer tricks, HP LaserJet 6P   Vintage Coder
• HP 7470A plotter -- repairing/replacing paper feed rollers   Rik Bos
• HP 7470A plotter -- repairing/replacing paper feed rollers   SPC
• RQDX3 DEVOFFLINE Problems   Tony Duell
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Tony Duell
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Tony Duell
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• Data I/O 2900 - How good is it?   Alexandre Souza - Listas
• HP 7470A plotter -- repairing/replacing paper feed rollers   Chuck Guzis
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• Data I/O 2900 - How good is it?   Eric Smith
• HP 7470A plotter -- repairing/replacing paper feed rollers   Chuck Guzis
• Data I/O 2900 - How good is it?   Alexandre Souza - Listas
• "Zilog 6502" in _IEEE Computer_   Eric Smith
• Data I/O 2900 - How good is it?   Al Kossow
• HP 7470A plotter -- repairing/replacing paper feed rollers   Glen Slick
• HP 7470A plotter -- repairing/replacing paper feed rollers   Philip Pemberton
• DiscFerret disc analysers for sale!   Dave
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• HP 7470A plotter -- repairing/replacing paper feed rollers   Philip Pemberton
• RQDX3 DEVOFFLINE Problems   Tony Duell
• What's 6 Feet Tall and Weighs 1,500 Pounds? A Minicomputer   Tony Duell
• Data I/O 2900 - How good is it?   Dave McGuire
• Data I/O 2900 - How good is it?   Dave McGuire
• Data I/O 2900 - How good is it?   Dave McGuire
• TRS-80 Model II Digging   Fred Cisin
• RQDX3 DEVOFFLINE Problems   allison
• Difficulties of digital preservation - was Re: eBay... Yikes! (PDP-1 Handbook)   TeoZ
• HP 7470A plotter -- repairing/replacing paper feed rollers   Chuck Guzis
• TRS-80 Model II Digging   Terry Stewart
• Train shipping ( was Re: VT fixums )   Philip Pemberton
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• RQDX3 DEVOFFLINE Problems   Eric Smith
• cctalk Digest, Vol 97, Issue 5   Colin Eby
• RQDX3 DEVOFFLINE Problems   Eric Smith
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• HP 7470A plotter -- repairing/replacing paper feed rollers   Philip Pemberton
• RQDX3 DEVOFFLINE Problems   ben
• HP 7470A plotter -- repairing/replacing paper feed rollers   Philip Pemberton
• Anyone interested in an AT&T 6300?   Dave McGuire
• HP 7470A plotter -- repairing/replacing paper feed rollers   William Donzelli
• What's 6 Feet Tall and Weighs 1,500 Pounds? A Minicomputer   Dave McGuire
• Adding machine repair   Alexey Toptygin
• Anyone interested in an AT&T 6300?   Curt at Atari Museum
• Adding machine repair   Dave Caroline
• Data I/O 2900 - How good is it?   Al Kossow
• Anyone interested in an AT&T 6300?   Dave McGuire
• RQDX3 DEVOFFLINE Problems   Eric Smith
• RQDX3 DEVOFFLINE Problems   allison
• Looking for SunOS 4.1.* (sun3) cd image   Brian Wheeler
• Data I/O 2900 - How good is it?   Dave McGuire
• Looking for SunOS 4.1.* (sun3) cd image   Dave McGuire
• Adding machine repair   Alexey Toptygin
• Looking for SunOS 4.1.* (sun3) cd image   Brian Wheeler
• TI CD 1400 Drive [for sale / offers]   Paxton Hoag
• TRS-80 Model II Digging   steven stengel
• Train shipping ( was Re: VT fixums )   jim s
• Macintosh Programmers' Workshop - Fwd: MPW turns 25!   Toby Thain
• RQDX3 DEVOFFLINE Problems   Eric Smith
• What's 6 Feet Tall and Weighs 1,500 Pounds? A Minicomputer   Ian King
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Al Kossow
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• HP 7470A plotter -- repairing/replacing paper feed rollers   Gene Buckle
• WANTED: More regional collectors   Michael B. Brutman
• Can anyone ID this machine?   Torfinn Ingolfsen
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Data I/O 2900 - How good is it?   Lyle Bickley
• DEC PWS 500au boot failure   Brian Wheeler
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• Adding machine repair   Tom
• RT-11 v2C Fortran   B M
• Need switch settings for...   Bill Sudbrink
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• TI CD 1400 Drive [for sale / offers]   Michael Thompson
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   jim s
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   jim s
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Jason McBrien
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   jim s
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Adding machine repair   Michael B. Brutman
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Difficulties of digital preservation - was Re: eBay... Yikes!   Tony Duell
• TRS-80 Model II Digging   Tony Duell
• Train shipping ( was Re: VT fixums )   Tony Duell
• Data I/O 2900 - How good is it?   Geoffrey Reed
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• Data I/O 2900 - How good is it?   Geoffrey Reed
• Early 3D rendition   James Wilson
• RQDX3 DEVOFFLINE Problems   Tony Duell
• Original Prices of DEC Equipment   Toby Thain
• RQDX3 DEVOFFLINE Problems   Tony Duell
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• RQDX3 DEVOFFLINE Problems   Tony Duell
• HP 7470A plotter -- repairing/replacing paper feed rollers   Tony Duell
• Adding machine repair   Tony Duell
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Adding machine repair   Pete Turnbull
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Pete Turnbull
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Josh Dersch
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500Pounds?)   Vintage Coder
• HP Moseley Plotter   William Donzelli
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• Adding machine repair   Tony Duell
• Data I/O 2900 - How good is it?   Al Kossow
• DEC GIGI (again)   Mark Wickens
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500Pounds?)   Dave McGuire
• Original Prices of DEC Equipment   Rob Jarratt
• RQDX3 DEVOFFLINE Problems   Rob Jarratt
• Looking for SunOS 4.1.* (sun3) cd image   Josh Dersch
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Alexander Schreiber
• Adding machine repair   Alexey Toptygin
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Data I/O 2900 - How good is it?   Dave McGuire
• TRS-80 Model II Digging   Geoffrey Reed
• Data I/O 2900 - How good is it?   Geoffrey Reed
• Adding machine repair   Chuck Guzis
• HP 7470A plotter -- repairing/replacing paper feed rollers   Chuck Guzis
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Josh Dersch
• Data I/O 2900 - How good is it?   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• DEC PWS 500au boot failure   Peter Coghlan
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Looking for SunOS 4.1.* (sun3) cd image   jim s
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Alexander Schreiber
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Dave McGuire
• DiscFerret disc analysers for sale!   Steven Hirsch
• RQDX3 DEVOFFLINE Problems   Rick Murphy
• DEC PWS 500au boot failure   Tom publix
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   David Griffith
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   David Griffith
• DEC PWS 500au boot failure   Brian Wheeler
• P112 boot rom 5.1   David Griffith
• TI CD 1400 Drive [for sale / offers]   Christian Corti
• Train shipping ( was Re: VT fixums )   jonas at otter.se
• Adding machine repair   Rod Smallwood
• DiscFerret disc analysers for sale!   Philip Pemberton
• DEC PWS 500au boot failure   Brian Wheeler
• DiscFerret disc analysers for sale!   Al Kossow
• DiscFerret disc analysers for sale!   Alexandre Souza - Listas
• Early 3D rendition   Richard
• DEC PWS 500au boot failure   Tom publix
• DiscFerret disc analysers for sale!   Chuck Guzis
• DiscFerret disc analysers for sale!   Fred Cisin
• DEC GIGI (again)   Tony Duell
• HP 7470A plotter -- repairing/replacing paper feed rollers   John Foust
• RQDX3 DEVOFFLINE Problems   Tony Duell
• Adding machine repair   Tony Duell
• TRS-80 Model II Digging   Tony Duell
• HP 7470A plotter -- repairing/replacing paper feed rollers   Ethan Dicks
• HP 7470A plotter -- repairing/replacing paper feed rollers   William Donzelli
• HP 7470A plotter -- repairing/replacing paper feed rollers   William Donzelli
• Adding machine repair   John Foust
• HP 7470A plotter -- repairing/replacing paper feed rollers   Chuck Guzis
• More house cleaning...   Paul Anderson
• at&t 3b1, pc7300   emanuel stiebler
• Data I/O 2900 - How good is it?   Geoffrey Reed
• hp 9000/382   emanuel stiebler
• HP 7470A plotter -- repairing/replacing paper feed rollers   Fred Cisin
• TRS-80 Model II Digging   Geoffrey Reed
• at&t 3b1, pc7300   Al Kossow
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Jochen Kunz
• hp 9000/382   Al Kossow
• TRS-80 Model II Digging   Chuck Guzis
• DiscFerret disc analysers for sale!   Al Kossow
• at&t 3b1, pc7300   emanuel stiebler
• More house cleaning...   Rob Jarratt
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Paul Anderson
• DiscFerret disc analysers for sale!   jim s
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Adrian Stoness
• at&t 3b1, pc7300   SPC
• DiscFerret disc analysers for sale!   Fred Cisin
• hp 9000/382   Rik Bos
• DiscFerret disc analysers for sale!   Philip Pemberton
• More house cleaning...   Paul Anderson
• hp 9000/382   emanuel stiebler
• DiscFerret disc analysers for sale!   Fred Cisin
• at&t 3b1, pc7300   Philip Pemberton
• scarcity of digital preservation efforts - was Re: eBay... Yikes!   Andrew Burton
• DiscFerret disc analysers for sale!   Fred Cisin
• Floppy Images (was Re: DiscFerret disc analysers for sale!)   Al Kossow
• Adding machine repair   Pete Turnbull
• hp 9000/382   Rik Bos
• "Zilog 6502" in _IEEE Computer_   Andrew Burton
• at&t 3b1, pc7300   Eric Smith
• Wall Street Journal has an article about Paul Allen's Computer Museum   Lyle Bickley
• DiscFerret disc analysers for sale!   Chuck Guzis
• DiscFerret disc analysers for sale!   ben
• "Zilog 6502" in _IEEE Computer_   Eric Smith
• at&t 3b1, pc7300   SPC
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   TeoZ
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Mike Loewen
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   TeoZ
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   TeoZ
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Paul Anderson
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Chuck Guzis
• Data I/O 2900 - How good is it?   Eric Smith
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Eric Smith
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Paul Anderson
• hp 9000/382   Olivier De Smet
• Free: Big CRTs in Chicago   Jason T
• Adding machine repair   Paxton Hoag
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Toby Thain
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   John Foust
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   Mike Loewen
• Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)   William Donzelli
• Data I/O 2900 - How good is it?   steve shumaker
• 9762 Cray pack recovery   Al Kossow
• Adding machine repair   Robert Ollerton
• Adding machine repair   Dave Caroline
• Adding machine repair   rollerton at gmail.com
• Adding machine repair   Chuck Guzis
• Data I/O 2900 - How good is it?   Eric Smith
• Adding machine repair   rollerton at gmail.com
• Adding machine repair   Fred Cisin
• Train shipping ( was Re: VT fixums )   Tony Duell
• Adding machine repair   rollerton at gmail.com
• hp 9000/382   Tony Duell
• DiscFerret disc analysers for sale!   Tony Duell
• Current metal values (was What's 6 Feet Tall and Weighs 1,   Tony Duell
• Adding machine repair   Pete Turnbull
• Adding machine repair   Pete Turnbull
• Adding machine repair   Tony Duell
• Data I/O 2900 - How good is it?   steve shumaker
• Adding machine repair   rollerton at gmail.com
• Current metal values (was What's 6 Feet Tall and Weighs 1,   Chuck Guzis
• Adding machine repair   Tony Duell
• CDC 9766 Disk Pak reading   Curt at Atari Museum
• DiscFerret disc analysers for sale!   Chuck Guzis
• 9762 Cray pack recovery   John Foust
• DiscFerret disc analysers for sale!   Alexandre Souza - Listas
• Adding machine repair   Tony Duell
• DiscFerret disc analysers for sale!   Tony Duell
• DiscFerret disc analysers for sale!   Tony Duell
• Adding machine repair   Pete Turnbull
• hp 9000/382   Rik Bos
• DiscFerret disc analysers for sale!   Chuck Guzis
• 9762 Cray pack recovery   Al Kossow
• hp 9000/382   auringer tds.net
• VAX 11/730 - free to good home - via comp.sys.dec   Toby Thain
• B-29 targeting computer   Brian Lanning
• Documentation for Clearpoint SNXRAM/12 VME board?   Earl D. Baugh Jr.
• B-29 targeting computer   Alexis
• B-29 targeting computer   E. Groenenberg
• B-29 targeting computer   Rod Smallwood
• Train shipping ( was Re: VT fixums )   jonas at otter.se
• 9762 Cray pack recovery   Christian Corti
• 9762 Cray pack recovery   Al Kossow
• 9762 Cray pack recovery   Christian Corti
• 9762 Cray pack recovery   Al Kossow
• Data I/O 2900 - How good is it?   Mark Kahrs
• Old Memorex Terminals   Tom Gardner
• Anyone interested in an AT&T 6300?   Chris M
• Adding machine repair   Tony Duell
• hp 9000/382   Tony Duell
• DiscFerret disc analysers for sale!   Tony Duell
• hp 9000/382   Rik Bos
• DiscFerret disc analysers for sale!   Alexandre Souza - Listas
• DiscFerret disc analysers for sale!   Chuck Guzis
• Anyone interested in an AT&T 6300?   Chuck Guzis
• DEC PWS 500au boot failure   Brian Wheeler
• via LisaList - Fwd: Original Lisa 1 for sale   Toby Thain
• DECstation 5000/120 bad power supply...   Brian Wheeler
• Looking asr33 interfacing AND NEMA crypto machine help in Ojai, California   B Degnan
• Data I/O 2900 - How good is it?   Alexandre Souza - Listas
• Anyone interested in an AT&T 6300?   Tony Duell
• printers was: DiscFerret disc analysers for sale!   Jonas Otter
• DiscFerret disc analysers for sale!   Tony Duell
• DiscFerret disc analysers for sale!   Tony Duell
• Kilobaud Micro, October, November 1979?   Bill Sudbrink
• DECstation 5000/120 bad power supply...   Tony Duell
• Kilobaud Micro, October, November 1979?   steve shumaker
• DiscFerret disc analysers for sale!   Chuck Guzis
• "Zilog 6502" in _IEEE Computer_   Andrew Burton
• Interesting email addresses of old...   Mark Wickens
• Interesting email addresses of old...   Zane H. Healy
• Interesting email addresses of old...   Adrian Stoness
• Kilobaud Micro, October, November 1979?   Chris Elmquist
• Interesting email addresses of old...   William Donzelli
• "Zilog 6502" in _IEEE Computer_   William Donzelli
• Kilobaud Micro, October, November 1979?   Evan Koblentz
• Interesting email addresses of old...   Brent Hilpert
• Interesting email addresses of old...   Mike Loewen
• "Zilog 6502" in _IEEE Computer_   Alexandre Souza - Listas
• Interesting email addresses of old...   jim s
• Interesting email addresses of old...   Ian King
• Interesting email addresses of old...   Mike Loewen
• printers was: DiscFerret disc analysers for sale!   TeoZ
• Desoldering (Again)   Rob Jarratt
• Desoldering (Again)   Martin Bishop
• Interesting email addresses of old...   Shoppa, Tim
• gold scrapping   John Foust
• Desoldering (Again)   dwight elvey
• gold scrapping   Dave Caroline
• Desoldering (Again)   Chuck Guzis
• DECstation 5000/120 bad power supply...   Brian Wheeler
• "Zilog 6502" in _IEEE Computer_   Chuck Guzis
• Desoldering (Again)   Al Kossow
• Desoldering (Again)   Martin Bishop
• DECstation 5000/120 bad power supply...   Ian King
• Clearing out '90s PC stuff (UK)   Lawrence Wilkinson
• printers was: DiscFerret disc analysers for sale!   Tony Duell
• Desoldering (Again)   Tony Duell
• DECstation 5000/120 bad power supply...   Tony Duell
• Interesting email addresses of old...   Jason T
• Interesting email addresses of old...   Jason T
• Desoldering (Again)   John Robertson
• Interesting email addresses of old...   Chuck Guzis
• Desoldering (Again)   Rob Jarratt
• Desoldering (Again)   Rob Jarratt
• Desoldering (Again)   Chuck Guzis
• Timeworks Desktop Publisher and Textcraft   David Griffith
• Interesting email addresses of old...   Pete Turnbull
• "Zilog 6502" in _IEEE Computer_   William Donzelli
• "Zilog 6502" in _IEEE Computer_   David Griffith
• Desoldering (Again)   dwight elvey
• "Zilog 6502" in _IEEE Computer_   Sridhar Ayengar
• Interesting email addresses of old...   Brent Hilpert
• Choosing a USB RS232 converter   David Griffith
• Choosing a USB RS232 converter   dbwood at kc.rr.com
• Interesting email addresses of old...   N0body H0me
• Choosing a USB RS232 converter   Rob Jarratt
• Not usual Kaypro   SPC
• Choosing a USB RS232 converter   David Griffith
• Not usual Kaypro   Zane H. Healy
• Choosing a USB RS232 converter   Rob Jarratt
• Choosing a USB RS232 converter   Martin Bishop
• Desoldering (Again)   Martin Bishop
• Clearing out '90s PC stuff (UK)   Liam Proven
• Interesting email addresses of old...   Pete Turnbull
• Desoldering (Again)   Rob Jarratt
• Choosing a USB RS232 converter   emanuel stiebler
• Choosing a USB RS232 converter   Gene Buckle
• Choosing a USB RS232 converter   Richard Cini
• Choosing a USB RS232 converter   Chuck Guzis
• Desoldering (Again)   Tony Duell
• Desoldering (Again)   Tony Duell
• Desoldering (Again)   Fred Cisin
• "Zilog 6502" in _IEEE Computer_   Tony Duell
• Desoldering (Again)   Tony Duell
• Interesting email addresses of old...   Fred Cisin
• printers was: DiscFerret disc analysers for sale!   Jonas Otter
• Choosing a USB RS232 converter   Fred Cisin
• Desoldering (Again)   Chuck Guzis
• Choosing a USB RS232 converter   Keith Monahan
• Desoldering (Again)   jim s
• Not usual Kaypro   allison
• Desoldering (Again)   Tony Duell
• Choosing a USB RS232 converter   Eric Smith
• Desoldering (Again)   Rob Jarratt
• Desoldering (Again)   Chuck Guzis
• Desoldering (Again)   jim s
• Desoldering (Again)   William Donzelli
• Desoldering (Again)   Chuck Guzis
• Soldering stations - OKi-Metcal, Pace or something else?   Philip Pemberton
• Soldering stations - OKi-Metcal, Pace or something else?   Al Kossow
• Soldering stations - OKi-Metcal, Pace or something else?   Bill Sudbrink
• Soldering stations - OKi-Metcal, Pace or something else?   Simon Fryer
• Desoldering (Again)   jim s
• VAX 6000 diagnostics CDROM   cctech at vax-11.org
• Desoldering (Again)   Sridhar Ayengar
• FS (MA-USA): DEC Y SCSI, Alpha book--the paper kind, Konexx acoustic coupler, HP 1630D LA, DAT DDS3   J. Peterson
• Desoldering (Again)   TeoZ
• Desoldering (Again)   Chuck Guzis
• Soldering stations - OKi-Metcal, Pace or something else?   Geoffrey Reed
• 1970's AT&T Twin Towers Film   leaknoil
• FS (MA-USA): DEC Y SCSI, Alpha book--the paper kind, Konexx acoustic coupler, HP 1630D LA, DAT DDS3   Jim Stephens
• Soldering stations - OKi-Metcal, Pace or something else?   Dave
• Desoldering (Again)   Pete Turnbull
• Desoldering (Again)   Pete Turnbull
• Soldering stations - OKi-Metcal, Pace or something else?   Eric Smith
• Soldering stations - OKi-Metcal, Pace or something else?   emanuel stiebler
• Nixdorf 8810 M15   Tiina at FinnTrans
• VAX 6000 diagnostics CDROM   Ian King
• at&t 3b1, pc7300   Chris M
• at&t 3b1, pc7300   Chris M
• Anyone interested in an AT&T 6300?   Chris M
• Soldering stations - OKi-Metcal, Pace or something else?   Philip Pemberton
• VAX 6000 diagnostics CDROM   Rik Bos
• printers was: DiscFerret disc analysers for sale!   Tony Duell
• Desoldering (Again)   Tony Duell
• Desoldering (Again)   Tony Duell
• Soldering stations - OKi-Metcal, Pace or something else?   Tony Duell
• Desoldering (Again)   Jonas Otter
• Opening up an RD54 Disk   Rob Jarratt
• Soldering stations - OKi-Metcal, Pace or something else?   Chuck Guzis
• S-100 buffered prototyping board PCBs   Andrew Lynch
• Soldering stations - OKi-Metcal, Pace or something else?   Philip Pemberton
• 1970's AT&T Twin Towers Film   Richard Cini
• VAX 6000 diagnostics CDROM   cctech at vax-11.org
• at&t 3b1, pc7300   Al Kossow
• cleaning and maintenance for an ASR33   Joe Giliberti
• AT&T unix PC   TeoZ
• AT&T unix PC   Dave McGuire
• AT&T unix PC   leaknoil
• at&t 3b1, pc7300   SPC
• HP, DEC, Olivetti & Apple stuff   E. Groenenberg
• What is DEC W9042 for   Pontus Pihlgren
• HP, DEC, Olivetti & Apple stuff   SPC
• What is DEC W9042 for   Dave Caroline
• What is DEC W9042 for   E. Groenenberg
• at&t 3b1, pc7300   Philip Pemberton
• HP, DEC, Olivetti & Apple stuff   Rob Jarratt
• What is DEC W9042 for   Pontus Pihlgren
• Seattle Retro-Computing Society's monthly meeting Saturday, September 17th, 2011   Glen Slick
• AT&T unix PC   Dave McGuire
• HP, DEC, Olivetti & Apple stuff   Bob Brown
• AT&T unix PC   B. Degnan
• cleaning and maintenance for an ASR33   Chris M
• AT&T unix PC   Chris M
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• Desoldering (Again)   Tony Duell
• Soldering stations - OKi-Metcal, Pace or something else?   Tony Duell
• cleaning and maintenance for an ASR33   Tony Duell
• Interesting email addresses of old...   Kevin Monceaux
• Interesting email addresses of old...   Ethan Dicks
• Soldering stations - OKi-Metcal, Pace or something else?   Dave
• Soldering stations - OKi-Metcal, Pace or something else?   Dave
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• Soldering stations - OKi-Metcal, Pace or something else?   Eric Smith
• DEC 4' Cabinet   Curt at Atari Museum
• Soldering stations - OKi-Metcal, Pace or something else?   Chuck Guzis
• DEC 4' Cabinet   Paul Anderson
• AT&T unix PC   Curtis H. Wilbar Jr.
• DEC 4' Cabinet   Curt at Atari Museum
• New rsync mirroring at trailing-edge.com   jim s
• New rsync mirroring at trailing-edge.com   jim s
• Soldering stations - OKi-Metcal, Pace or something else?   Philip Pemberton
• HP, DEC, Olivetti & Apple stuff   dwight elvey
• New rsync mirroring at trailing-edge.com   Al Kossow
• HP, DEC, Olivetti & Apple stuff   Torfinn Ingolfsen
• cleaning and maintenance for an ASR33   Tony Duell
• Soldering stations - OKi-Metcal, Pace or something else?   Tony Duell
• HP, DEC, Olivetti & Apple stuff   Pontus
• Soldering stations - OKi-Metcal, Pace or something else?   Dave
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• Soldering stations - OKi-Metcal, Pace or something else?   Fred Cisin
• HP, DEC, Olivetti & Apple stuff   Al Kossow
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• HP, DEC, Olivetti & Apple stuff   Al Kossow
• HP, DEC, Olivetti & Apple stuff   Alexey Toptygin
• HP, DEC, Olivetti & Apple stuff   Rod Smallwood
• Soldering stations - OKi-Metcal, Pace or something else?   Tony Duell
• HP, DEC, Olivetti & Apple stuff   Tony Duell
• HP, DEC, Olivetti & Apple stuff   Tony Duell
• Soldering stations - OKi-Metcal, Pace or something else?   Tony Duell
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• AT&T unix PC   Al Kossow
• AT&T unix PC   TeoZ
• AT&T unix PC   Eric Smith
• AT&T unix PC   Curtis H. Wilbar Jr.
• Model M screws   David Griffith
• Model M screws   Chuck Guzis
• New rsync mirroring at trailing-edge.com   jim s
• Model M screws   David Griffith
• More DEC Bad luck.   Brian Wheeler
• More DEC Bad luck.   Dave Caroline
• More DEC Bad luck.   Zane H. Healy
• More DEC Bad luck.   Mark Wickens
• DEC Floppy drive DS-53A   Chuck Guzis
• ASR 33 For Sale - Fully Restored   B Degnan
• HP, DEC, Olivetti & Apple stuff   Tony Duell
• GT44/46 brochures   Al Kossow
• GT44/46 brochures   SPC
• Are the HP9100 and HP9810 calcualtors really RPN machines?   Tony Duell
• Opening up an RD54 Disk   Rob Jarratt
• Are the HP9100 and HP9810 calcualtors really RPN machines?   Eric Smith
• Opening up an RD54 Disk   Eric Smith
• DEC VT330 and LK250s on Ebay   Dave Mitton
• More DEC Bad luck.   Peter Coghlan
• More DEC Bad luck.   Brian Wheeler
• Opening up an RD54 Disk   Tony Duell
• Are the HP9100 and HP9810 calcualtors really RPN machines?   Tony Duell
• More DEC Bad luck.   Peter Coghlan
• Opening up an RD54 Disk   Rob Jarratt
• Opening up an RD54 Disk   Eric Smith
• GT44/46 brochures   Mark Wickens
• Opening up an RD54 Disk   Dave McGuire
• HP, DEC, Olivetti & Apple stuff   Dave McGuire
• Opening up an RD54 Disk   Rob Jarratt
• Opening up an RD54 Disk   Rob Jarratt
• Opening up an RD54 Disk   Tony Duell
• Opening up an RD54 Disk   Eric Smith
• mac software on ebay   Al Kossow
• Opening up an RD54 Disk   Rob Jarratt
• Opening up an RD54 Disk   Tony Duell
• Opening up an RD54 Disk   Tony Duell
• Opening up an RD54 Disk   Tony Duell
• Opening up an RD54 Disk   Dave McGuire
• Soldering stations - OKi-Metcal, Pace or something else?   Dave McGuire
• More DEC Bad luck.   Peter Coghlan
• Opening up an RD54 Disk   Rob Jarratt
• Opening up an RD54 Disk   Rob Jarratt
• IBM 3174-90R   SPC
• Soldering stations - OKi-Metcal, Pace or something else?   Chuck Guzis
• GT44/46 brochures   Paul Anderson
• More DEC Bad luck.   Paul Anderson
• More DEC Bad luck.   Paul Anderson
• Data I/O 2900 - How good is it?   Dave McGuire
• Interesting email addresses of old...   Dave McGuire
• Interesting email addresses of old...   Rich Alderson
• Interesting email addresses of old...   Dave McGuire
• Soldering stations - OKi-Metcal, Pace or something else?   Doc
• Opening up an RD54 Diskt   Tony Duell
• Opening up an RD54 Disk   Tony Duell
• WTD: 0.156in 2x10 or 1x10 edge connector for Motorola/Displaytek M1000-355 CRT   Philip Pemberton
• WTD: 0.156in 2x10 or 1x10 edge connector for Motorola/Displaytek M1000-355 CRT   Glen Slick
• WTD: 0.156in 2x10 or 1x10 edge connector for Motorola/Displaytek M1000-355 CRT   Chuck Guzis
• MicroPLATO Pascal Course   SPC
• MicroPLATO Pascal Course   Vintage Coder
• MicroPLATO Pascal Course   Jason T
• PLATO for C64 (was: MicroPLATO Pascal Course)   Jim Brain
• PLATO for C64 (was: MicroPLATO Pascal Course)   Jason T
• MicroPLATO Pascal Course   Jason T
• MicroPLATO Pascal Course   SPC
• PLATO for C64 (was: MicroPLATO Pascal Course)   SPC
• MicroPLATO Pascal Course   Jason T
• MicroPLATO Pascal Course   Vintage Coder
• Soldering stations - OKi-Metcal, Pace or something else?   jonas at otter.se
• More DEC Bad luck.   Brian Wheeler
• MicroPLATO Pascal Course   Chuck Guzis
• MicroPLATO Pascal Course   Chuck Guzis
• MicroPLATO Pascal Course   vintagecoder at aol.com
• MicroPLATO Pascal Course   vintagecoder at aol.com
• MicroPLATO Pascal Course   Al Kossow
• MicroPLATO Pascal Course   Al Kossow
• MicroPLATO Pascal Course   Al Kossow
• WTD: 0.156in 2x10 or 1x10 edge connector for Motorola/Displaytek   Tony Duell
• MicroPLATO Pascal Course   Chuck Guzis
• PLATO for C64   Jim Brain
• New rsync mirroring at trailing-edge.com   Dave McGuire
• PLATO for C64   SPC
• MicroPLATO Pascal Course   Vintage Coder
• New rsync mirroring at trailing-edge.com   Adam Sampson
• New rsync mirroring at trailing-edge.com   Al Kossow
• More DEC Bad luck.   Peter Coghlan
• MicroPLATO Pascal Course   vintagecoder at aol.com
• New rsync mirroring at trailing-edge.com   Chuck Guzis
• New rsync mirroring at trailing-edge.com   Vintage Coder
• New rsync mirroring at trailing-edge.com   Al Kossow
• New rsync mirroring at trailing-edge.com   Chuck Guzis
• New rsync mirroring at trailing-edge.com   Al Kossow
• New rsync mirroring at trailing-edge.com   Vintage Coder
• New rsync mirroring at trailing-edge.com   Chuck Guzis
• Soldering stations - OKi-Metcal, Pace or something   Tony Duell
• New rsync mirroring at trailing-edge.com   jim s
• IBM Model M keyboard repair tip   Tony Duell
• New rsync mirroring at trailing-edge.com   Tony Duell
• New rsync mirroring at trailing-edge.com   Chuck Guzis
• New rsync mirroring at trailing-edge.com   TeoZ
• New rsync mirroring at trailing-edge.com   Vintage Coder
• IBM Model M keyboard repair tip   Vintage Coder
• RK05   Christian Corti
• RANT: Never enough room (was: New rsync mirroring at   Fred Cisin
• RANT: Never enough room (was: New rsync mirroring at   Glen Slick
• New rsync mirroring at trailing-edge.com   Chuck Guzis
• RK05   Paul Anderson
• RANT: Never enough room (was: New rsync mirroring at   Fred Cisin
• RANT: Never enough room   Al Kossow
• IBM Model M keyboard repair tip   David Griffith
• New rsync mirroring at trailing-edge.com   TeoZ
• IBM Model M keyboard repair tip   Barry L. Kline
• New rsync mirroring at trailing-edge.com   Chuck Guzis
• IBM Model M keyboard repair tip   Gene Buckle
• RK05   Christian Corti
• New rsync mirroring at trailing-edge.com   TeoZ
• RANT: Never enough room   Jim Stephens
• Interesting email addresses of old...   Dave McGuire
• RANT: Never enough room   Ian King
• TTI 8510 Manual and/or switch settings...   Lyle Bickley
• RANT: Never enough room   Jim Stephens
• DEC Computer Lab workbook   Robert Fantinatto
• RANT: Never enough room   Jerome H. Fine
• RANT: Never enough room   Toby Thain
• RANT: Never enough room   TeoZ
• RANT: Never enough room   Chuck Guzis
• RANT: Never enough room   Toby Thain
• RANT: Never enough room   TeoZ
• seeking ExperLisp by Expertelligence for Macintosh   Nigel Williams
• DEC GIGI - Power Supply Replacement Success   Mark Wickens
• IBM Model M keyboard repair tip   Mark Wickens
• IBM Model M keyboard repair tip   Steven Hirsch
• IBM Model M keyboard repair tip   Vintage Coder
• RANT: Never enough room   emanuel stiebler
• RANT: Never enough room   John Foust
• Lots of Amiga stuff available   David Betz
• IBM Model M keyboard repair tip   Liam Proven
• Lots of Amiga stuff available   Ethan Dicks
• Installing OpenVMS Software   David Coolbear
• Lots of Amiga stuff available   Michael Kerpan
• Installing OpenVMS Software   Peter Coghlan
• Lots of Amiga stuff available   Joachim Thiemann
• Installing OpenVMS Software   Glen Slick
• RK05   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• RK05   Tony Duell
• DEC GIGI - Power Supply Replacement Success   Tony Duell
• RANT: Never enough room   Fred Cisin
• HP wish list   Mike Loewen
• IBM Model M keyboard repair tip   Tony Duell
• RANT: Never enough room   John Foust
• RANT: Never enough room   Dave Caroline
• RK05   Ethan Dicks
• RANT: Never enough room   Fred Cisin
• RANT: Never enough room   Doc Shipley
• RK05   Tony Duell
• RANT: Never enough room   Ian King
• RANT: Never enough room   Ian King
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Kevin Monceaux
• RK05   Ethan Dicks
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Barry L. Kline
• DEC GIGI - Power Supply Replacement Success   Mark Wickens
• RANT: Never enough room   Rich Alderson
• RANT: Never enough room   Ian King
• EDA Electronics cards??? got a bag of them duno what they're from   Adrian Stoness
• IBM Model M keyboard repair tip   Fred Cisin
• EDA Electronics cards??? got a bag of them duno what they're from   Dave McGuire
• EDA Electronics cards??? got a bag of them duno what they're from   Dave McGuire
• IBM Model M keyboard repair tip   Chuck Guzis
• intel mds 225   Adrian Stoness
• EDA Electronics cards??? got a bag of them duno what they're from   jim s
• intel mds 225   Dave Mabry
• intel mds 225   Adrian Stoness
• RANT: Never enough room   Scott Kevill
• IBM Model M keyboard repair tip   David Griffith
• intel mds 225   Adrian Stoness
• intel mds 225   dwight elvey
• Installing OpenVMS Software   Glen Slick
• intel mds 225   Adrian Stoness
• EDA Electronics cards??? got a bag of them duno what they're from   Adrian Stoness
• intel mds 225   Adrian Stoness
• RK05   Christian Corti
• Repair Culture   Pontus Pihlgren
• IBM Model M keyboard repair tip   Liam Proven
• RANT: Never enough room   Gene Buckle
• EDA Electronics cards??? got a bag of them duno what they're from   Shoppa, Tim
• RK05   Al Kossow
• RL02 Disks available...   Curt at Atari Museum
• IBM Model M keyboard repair tip   Chuck Guzis
• Repair Culture   Chuck Guzis
• Repair Culture   Liam Proven
• IBM Model M keyboard repair tip   Liam Proven
• Repair Culture   Chuck Guzis
• Repair Culture   Adrian Stoness
• ETH Lilith's on Ebay sold...   Jos Dreesen
• intel mds 225   Dave Mabry
• Repair Culture   vintagecoder at aol.com
• Repair Culture   John Foust
• Repair Culture   Gene Buckle
• Repair Culture   Ian King
• Repair Culture   TeoZ
• IBM Model M keyboard repair tip   Tony Duell
• RK05   Tony Duell
• DEC GIGI - Power Supply Replacement Success   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• looking for a Tek Prism 3002   Chris M
• RK05   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• HP, DEC, Olivetti & Apple stuff   Glen Slick
• IBM Model M keyboard repair tip   Tony Duell
• HP, DEC, Olivetti & Apple stuff   Tony Duell
• HP, DEC, Olivetti & Apple stuff   SPC
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• intel mds 225   Jonathan Gevaryahu
• IBM Model M keyboard repair tip   Alexey Toptygin
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Chuck Guzis
• Repair Culture   Dave McGuire
• HP, DEC, Olivetti & Apple stuff   Glen Slick
• IBM Model M keyboard repair tip   David Griffith
• HP, DEC, Olivetti & Apple stuff   SPC
• Load for testing powersupplies.   Geoffrey Reed
• HP, DEC, Olivetti & Apple stuff   Paul Anderson
• Load for testing powersupplies.   Simon Fryer
• Load for testing powersupplies.   Geoffrey Reed
• Load for testing powersupplies.   Simon Fryer
• Load for testing powersupplies.   Fred Cisin
• HP, DEC, Olivetti & Apple stuff, and a true gem,,,   Jos Dreesen
• IBM Model M keyboard repair tip   E. Groenenberg
• HP, DEC, Olivetti & Apple stuff   E. Groenenberg
• HP, DEC, Olivetti & Apple stuff   SPC
• HP, DEC, Olivetti & Apple stuff (Olivetti Programma 101)   jim s
• HP, DEC, Olivetti & Apple stuff   Brent Hilpert
• Repair Culture   vintagecoder at aol.com
• HP, DEC, Olivetti & Apple stuff   Stéphane Tsacas
• HP, DEC, Olivetti & Apple stuff   Philipp Hachtmann
• Load for testing powersupplies.   Eric Smith
• RK05   Philipp Hachtmann
• RK05   Christian Corti
• HP, DEC, Olivetti & Apple stuff   SPC
• HP, DEC, Olivetti & Apple stuff   Philipp Hachtmann
• Stuff for Sale   Brian Wheeler
• Repair Culture   Chuck Guzis
• Is THAT what HP needs??   Fred Cisin
• Is THAT what HP needs??   Brian Wheeler
• OT: searching for Electrostatic Loudspeaker Design Cookbook   Bert Thomas
• Stuff for Sale   Steven Hirsch
• Stuff for Sale   Brian Wheeler
• Is THAT what HP needs??   Dave Caroline
• IBM Model M keyboard repair tip   Liam Proven
• Stuff for Sale   steve shumaker
• Stuff for Sale   Gene Buckle
• Is THAT what HP needs??   Chuck Guzis
• IBM Model M keyboard repair tip   Chuck Guzis
• Is THAT what HP needs??   Curt at Atari Museum
• Is THAT what HP needs??   Dave McGuire
• Is THAT what HP needs??   Dave McGuire
• Is THAT what HP needs??   Brian Wheeler
• Stuff for Sale   Chris M
• Load for testing powersupplies.   Chuck Guzis
• Is THAT what HP needs??   Ian King
• Electromigration (was: Re: Stuff for Sale)   Christian Kennedy
• IBM Model M keyboard repair tip   Tony Duell
• Repair Culture   Al Kossow
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• Load for testing powersupplies.   Tony Duell
• Is THAT what HP needs??   Chuck Guzis
• IBM Model M keyboard repair tip   Kevin Monceaux
• Floodgap back up   Cameron Kaiser
• Repair Culture   Dave McGuire
• Floodgap back up   Dave McGuire
• Floodgap back up   Cameron Kaiser
• HP, DEC, Olivetti & Apple stuff   Tony Duell
• Is THAT what HP needs??   Tony Duell
• Is THAT what HP needs??   Tony Duell
• Floodgap back up   Dave McGuire
• Repair Culture   Andrew Burton
• intel mds 225   Philip Pemberton
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Chuck Guzis
• Stuff for Sale   steve shumaker
• Repair Culture   TeoZ
• Stuff for Sale   TeoZ
• Repair Culture   Chuck Guzis
• IBM Model M keyboard repair tip   David Griffith
• Repair Culture   Dave McGuire
• Repair Culture   TeoZ
• Is THAT what HP needs??   Toby Thain
• Repair Culture   Toby Thain
• Stuff for Sale   Christian Kennedy
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Chuck Guzis
• Repair Culture   John Foust
• Is THAT what HP needs??   John Foust
• Repair Culture   Scott Kevill
• Is THAT what HP needs??   Cameron Kaiser
• Is THAT what HP needs??   Ian King
• HP, DEC, Olivetti & Apple stuff   Christian Corti
• IBM Model M keyboard repair tip   Liam Proven
• Repair Culture   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• Is THAT what HP needs??   Chris M
• Repair Culture   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• Microcolour terminal   Tony Duell
• Microcolour terminal   Dave Caroline
• IBM Model M keyboard repair tip   Dave McGuire
• IBM Model M keyboard repair tip   Chuck Guzis
• Microcolour terminal   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• Lots of Amiga stuff available   David Betz
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Dave McGuire
• IBM Model M keyboard repair tip   Doc Shipley
• Repair Culture   Andrew Burton
• Repair Culture   Andrew Burton
• push buttons w/ LED   Chris Elmquist
• IBM Model M keyboard repair tip   William Donzelli
• IBM Model M keyboard repair tip   Alexander Schreiber
• IBM Model M keyboard repair tip   Alexander Schreiber
• Crossposting - Fwd: [rescue] SCSI/SCA/DLT/FC/etc Stuff needs new home [pick up in North Fort Worth TX]   Toby Thain
• IBM Model M keyboard repair tip   Chuck Guzis
• [rescue] Stuff needs new home   Toby Thain
• IBM Model M keyboard repair tip   Chuck Guzis
• push buttons w/ LED   Al Kossow
• IBM Model M keyboard repair tip   Josh Dersch
• push buttons w/ LED   Bob Rosenbloom
• Those are some serious sideburns   leaknoil
• push buttons w/ LED   Shoppa, Tim
• IBM Model M keyboard repair tip   Liam Proven
• Is THAT what HP needs??   joe lobocki
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Liam Proven
• Those are some serious sideburns   Liam Proven
• Those are some serious sideburns   David Griffith
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Alexandre Souza - Listas
• update and pics of 11/785 and opps... slot machine   Paul Anderson
• update and pics of 11/785 and opps... slot machine   William Donzelli
• IBM Model M keyboard repair tip   Dave McGuire
• IBM Model M keyboard repair tip   Dave McGuire
• Those are some serious sideburns   SPC
• NorthStar stuff for sale   Andrew Lynch
• Those are some serious sideburns   Toby Thain
• RTE IV-B HP 7920 Grandfather and Primary system disc (NOS)   Rik Bos
• Wang 4000   Al Kossow
• Those are some serious sideburns   SPC
• update and pics of 11/785 and opps... slot machine   Al Kossow
• IBM Model M keyboard repair tip   Gene Buckle
• IBM Model M keyboard repair tip   Doc
• update and pics of 11/785 and opps... slot machine   Alexandre Souza - Listas
• TMA-11 Read   B M
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• Wang 4000   Curt at Atari Museum
• IBM Model M keyboard repair tip   Tony Duell
• update and pics of 11/785 and opps... slot machine   Paul Anderson
• intel mds 225   Adrian Stoness
• intel mds 225   Dave Mabry
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Fred Cisin
• Those are some serious sideburns   Fred Cisin
• update and pics of 11/785 and opps... slot machine   Dave McGuire
• update and pics of 11/785 and opps... slot machine   Paul Anderson
• intel mds 225   Adrian Stoness
• intel mds 225   Adrian Stoness
• oldest profession   David Griffith
• oldest profession   Dave McGuire
• intel mds 225   Dave Mabry
• IBM Model M keyboard repair tip   Chuck Guzis
• intel mds 225   Adrian Stoness
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Toby Thain
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Jules Richardson
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Toby Thain
• IBM Model M keyboard repair tip   Josh Dersch
• IBM Model M keyboard repair tip   Josh Dersch
• IBM Model M keyboard repair tip   Chuck Guzis
• Stuff for sale/free (Seattle area)   Josh Dersch
• IBM Model M keyboard repair tip   Toby Thain
• IBM Model M keyboard repair tip   Josh Dersch
• IBM Model M keyboard repair tip   Jules Richardson
• IBM Model M keyboard repair tip   Jules Richardson
• NTSC video output from Sinclair ZX81?   Charles Morris
• NTSC video output from Sinclair ZX81?   Alexis Kotlowy
• FS: Rack, Tape and Cassette drive for PDP in Boston area   Nick Allen
• SC Spreadsheet   David Coolbear
• SC Spreadsheet   Zane H. Healy
• intel mds 225   Adrian Stoness
• Classic computing, the invesment of the future (aka. Inflation)   SPC
• Classic computing, the invesment of the future (aka. Inflation)   Dave Caroline
• Classic computing, the invesment of the future (aka. Inflation)   SPC
• IBM Model M keyboard repair tip   Gene Buckle
• IBM Model M keyboard repair tip   Gene Buckle
• OS/2   Liam Proven
• OS/2   Peter Hicks
• OS/2   Liam Proven
• OS/2   Gene Buckle
• OS/2   Liam Proven
• OS/2   Peter Hicks
• OS/2   Gene Buckle
• Classic computing, the invesment of the future (aka. Inflation)   Adrian Stoness
• OS/2   Liam Proven
• OS/2   Curt at Atari Museum
• Classic computing, the invesment of the future (aka. Inflation)   emanuel stiebler
• Classic computing, the invesment of the future (aka. Inflation)   Alexis Kotlowy
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• Classic computing, the invesment of the future (aka. Inflation)   SPC
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• IBM Model M keyboard repair tip   Fred Cisin
• Classic computing, the invesment of the future (aka. Inflation)   Gene Buckle
• Classic computing, the invesment of the future (aka. Inflation)   Chuck Guzis
• IBM Model M keyboard repair tip   Dave McGuire
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• IBM Model M keyboard repair tip   Josh Dersch
• Classic computing, the invesment of the future (aka. Inflation)   Fred Cisin
• OS/2   Michael Kerpan
• IBM Model M keyboard repair tip   Josh Dersch
• Kaypro 4 CP/M disks   Percy Walls
• OS/2   Dave McGuire
• Is THAT what HP needs??   Tony Duell
• intel mds 225   Tony Duell
• push buttons w/ LED   Chris Elmquist
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• IBM Model M keyboard repair tip   Tony Duell
• MITS 680 Expander   Curt at Atari Museum
• Classic computing, the invesment of the future (aka. Inflation)   Rob Jarratt
• Classic computing, the invesment of the future (aka. Inflation)   William Donzelli
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• OS/2   Michael Kerpan
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• Classic computing, the invesment of the future (aka. Inflation)   Fred Cisin
• Classic computing, the invesment of the future (aka. Inflation)   Chuck Guzis
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• Finding one IBM 2741   SPC
• Classic computing, the invesment of the future (aka. Inflation)   Stéphane Tsacas
• MITS 680 Expander   Mike
• Rack, Tape and Cassette drive for PDP in Boston area   Rich Alderson
• intel mds 225   Dave McGuire
• Classic computing, the invesment of the future (aka. Inflation)   steve shumaker
• Is THAT what HP needs??   Chris M
• Wang 4000   Rick Bensene
• oldest profession   Chris M
• oldest profession   Chris M
• OS/2   madodel
• Is THAT what HP needs??   Chris M
• IBM Model M keyboard repair tip   David Griffith
• IBM Model M keyboard repair tip   Dave McGuire
• IBM Model M keyboard repair tip   Alexander Schreiber
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Toby Thain
• IBM Model M keyboard repair tip   Fred Cisin
• IBM Model M keyboard repair tip   Chuck Guzis
• Classic computing, the invesment of the future (aka. Inflation)   Toby Thain
• IBM Model M keyboard repair tip   Cameron Kaiser
• IBM Model M keyboard repair tip   Toby Thain
• IBM Model M keyboard repair tip   Glen Slick
• OS/2   Liam Proven
• OS/2   Liam Proven
• IBM Model M keyboard repair tip   David Griffith
• IBM Model M keyboard repair tip   David Griffith
• Classic computing, the invesment of the future (aka. Inflation)   Dave McGuire
• IBM Model M keyboard repair tip   TeoZ
• P112 kits ship   David Griffith
• IBM Model M keyboard repair tip   Glen Slick
• IBM Model M keyboard repair tip   William Donzelli
• IBM Model M keyboard repair tip   Geoffrey Reed
• IBM Model M keyboard repair tip   Cameron Kaiser
• IBM Model M keyboard repair tip   Ian King
• IBM Model M keyboard repair tip   Geoffrey Reed
• IBM Model M keyboard repair tip   Fred Cisin
• Kaypro 4 CP/M disks   Geoffrey Reed
• Classic computing, the invesment of the future (aka. Inflation)   Paul Anderson
• IBM Model M keyboard repair tip   Chuck Guzis
• IBM Model M keyboard repair tip   Dave McGuire
• Google Circles   Stéphane Tsacas
• update and pics of 11/785 and opps... slot machine   Paul Anderson
• Google Circles   SPC
• Google Circles   arcarlini at iee.org
• Copying in a real TU-58 one virtual TU-58 tape   SPC
• Copying in a real TU-58 one virtual TU-58 tape   allison
• IBM Model M keyboard repair tip   Glen Slick
• Copying in a real TU-58 one virtual TU-58 tape   SPC
• update and pics of 11/785 and opps... slot machine   Alexandre Souza - Listas
• Copying in a real TU-58 one virtual TU-58 tape   Chris Elmquist
• IBM Model M keyboard repair tip   Steven Hirsch
• OS/2   Steven Hirsch
• Copying in a real TU-58 one virtual TU-58 tape   SPC
• Copying in a real TU-58 one virtual TU-58 tape   Toby Thain
• Copying in a real TU-58 one virtual TU-58 tape   Toby Thain
• IBM Model M keyboard repair tip   Gene Buckle
• IBM Model M keyboard repair tip   Gene Buckle
• OS/2 VM   madodel
• IBM Model M keyboard repair tip   Jules Richardson
• IBM Model M keyboard repair tip   Jules Richardson
• update and pics of 11/785 and opps... slot machine   Glen Slick
• Kaypro 4 CP/M disks   Ethan Dicks
• OS/2 VM   John Foust
• update and pics of 11/785 and opps... slot machine   Tom Uban
• OS/2 VM   Curt at Atari Museum
• OS/2 VM   Josh Dersch
• IBM Model M keyboard repair tip   Liam Proven
• IBM Model M keyboard repair tip   emanuel stiebler
• OS/2 VM   John Foust
• OS/2 VM   Daniel Seagraves
• OS/2 VM   John Foust
• Kaypro 4 CP/M disks   Chuck Guzis
• IBM Model M keyboard repair tip   Chuck Guzis
• update and pics of 11/785 and opps... slot machine   Paul Anderson
• Tek 4170 load available near Seattle   Chuck Guzis
• OS/2 VM   Jonas Otter
• IBM Model M keyboard repair tip   Doc Shipley
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   Ian King
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   Zane H. Healy
• Is THAT what HP needs??   Tony Duell
• Classic computing, the invesment of the future (aka. Inflation)   Tony Duell
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   N0body H0me
• Copying in a real TU-58 one virtual TU-58 tape   Tony Duell
• looking for some RA60 drives   Dave McGuire
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   Jason McBrien
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   Doc Shipley
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   g_kurico.com
• Copying in a real TU-58 one virtual TU-58 tape   allison
• HP Laserjet 4+ and Sun lunchboxes in Paris   Alex J.
• WinNT on multiple platforms (was RE: IBM Model M keyboard repair tip)   Cameron Kaiser
• Copying in a real TU-58 one virtual TU-58 tape   allison
• Western Digital datasheets wanted: WD1017, WD3256, app note for WD10C20   Eric Smith
• Motorola appnote AN-859 wanted (MC6829 MMU)   Eric Smith
• Google Circles   Stéphane Tsacas
• Is THAT what HP needs??   Alexandre Souza - Listas
• OS/2 VM   Eric Smith
• Western Digital datasheets wanted: WD1017, WD3256, app note for WD10C20   Chuck Guzis
• IBM Model M keyboard repair tip   Liam Proven
• Western Digital datasheets wanted: WD1017, WD3256, app note for WD10C20   Eric Smith
• IBM Model M keyboard repair tip   Liam Proven
• Apple2gs emulation   David Griffith
• Mac IIci's: save or scrap   Brent Hilpert
• Mac IIci's: save or scrap   Cameron Kaiser
• Mac IIci's: save or scrap   Brent Hilpert
• Apple2gs emulation   Michael Kerpan
• Mac IIci's: save or scrap   TeoZ
• Mac IIci's: save or scrap   Toby Thain
• Is THAT what HP needs??   SPC
• Mac IIci's: save or scrap   Huw Davies
• Mac IIci's: save or scrap   Doc
• Motorola appnote AN-859 wanted (MC6829 MMU)   J. David Bryan
• Copying in a real TU-58 one virtual TU-58 tape   Will Kranz
• cctalk Digest, Vol 97, Issue 56   Shoppa, Tim
• oldest profession   Fred Cisin
• Mac IIci's: save or scrap   Brent Hilpert
• cctalk Digest, Vol 97, Issue 56   Ian King
• Is THAT what HP needs??   Tony Duell
• Copying in a real TU-58 one virtual TU-58 tape   Tony Duell
• Is THAT what HP needs??   Tony Duell
• Copying in a real TU-58 one virtual TU-58 tape   Chris Elmquist
• Apple2gs emulation   David Griffith
• oldest profession   joe lobocki
• Mac IIci's: save or scrap   Cameron Kaiser
• Copying in a real TU-58 one virtual TU-58 tape   Ethan Dicks
• Mac IIci's: save or scrap   Josh Dersch
• Mac IIci's: save or scrap   Toby Thain
• Kaypro 4 CP/M disks   Enrico Lazzerini
• Multitech MPF-PC   Enrico Lazzerini
• Ferguson BigBoard I & Microcornucopia Magazine   Enrico Lazzerini
• 8" floppies   jim s
• Ontel 8" floppy disc drives cabinet   SPC
• Apple2gs emulation   Steven Hirsch
• Copying in a real TU-58 one virtual TU-58 tape   Dan Gahlinger
• Migration from VAX 3100 to SIMH questions and looking for ideas   joe heck
• Ontel 8" floppy disc drives cabinet   Shoppa, Tim
• Migration from VAX 3100 to SIMH questions and looking for ideas   Shoppa, Tim
• 8" floppies   Al Kossow
• 8" floppies   Chuck Guzis
• Kaypro 4 CP/M disks   Chuck Guzis
• Ontel 8" floppy disc drives cabinet   SPC
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Christian Liendo
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Adrian Stoness
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Gene Buckle
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Dave McGuire
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Adrian Stoness
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Adrian Stoness
• Kanbak-uino Arduino-based KENBAK-1 Recreation   William Donzelli
• Machine code riddle (Fairchild Series 70 system)   jim s
• Migration from VAX 3100 to SIMH questions and looking for ideas   Rob Jarratt
• Machine code riddle (Fairchild Series 70 system)   Alexandre Souza - Listas
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Gene Buckle
• Machine code riddle (Fairchild Series 70 system)   Alexey Toptygin
• Firmware library was Kaypro 4 CP/M disks   steve shumaker
• Machine code riddle (Fairchild Series 70 system)   Chuck Guzis
• Migration from VAX 3100 to SIMH questions and looking for ideas   Brian Wheeler
• Firmware library was Kaypro 4 CP/M disks   Chuck Guzis
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Chuck Guzis
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Keith M
• Migration from VAX 3100 to SIMH questions and looking for ideas   Rich Alderson
• Copying in a real TU-58 one virtual TU-58 tape   Chris Elmquist
• Firmware library was Kaypro 4 CP/M disks   Dave McGuire
• Firmware library was Kaypro 4 CP/M disks   Alexandre Souza - Listas
• Firmware library was Kaypro 4 CP/M disks   Chuck Guzis
• Apple 2gs goodies   David Griffith
• Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's   Rik Bos
• Ontel 8" floppy disc drives cabinet   Tony Duell
• Ontel 8" floppy disc drives cabinet   Tony Duell
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Dave McGuire
• Migration from VAX 3100 to SIMH questions and looking for ideas   Dave McGuire
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Fred Cisin
• Copying in a real TU-58 one virtual TU-58 tape   Dave McGuire
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Ethan Dicks
• Machine code riddle (Fairchild Series 70 system)   Tony Duell
• Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's   Rik Bos
• Machine code riddle (Fairchild Series 70 system)   Tony Duell
• Copying in a real TU-58 one virtual TU-58 tape   Ethan Dicks
• Firmware library was Kaypro 4 CP/M disks   Tony Duell
• Firmware library was Kaypro 4 CP/M disks   Alexandre Souza - Listas
• Copying in a real TU-58 one virtual TU-58 tape   Alexandre Souza - Listas
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Dave McGuire
• Migration from VAX 3100 to SIMH questions and looking for ideas   emanuel stiebler
• Apple 2gs goodies   Gene Buckle
• Migration from VAX 3100 to SIMH questions and looking for ideas   Gene Buckle
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Chuck Guzis
• Copying in a real TU-58 one virtual TU-58 tape   Dave McGuire
• Machine code riddle (Fairchild Series 70 system)   Chuck Guzis
• Copying in a real TU-58 one virtual TU-58 tape   Chuck Guzis
• Migration from VAX 3100 to SIMH questions and looking for ideas   Dave McGuire
• Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's   steve shumaker
• Firmware library was Kaypro 4 CP/M disks   Chuck Guzis
• Machine code riddle (Fairchild Series 70 system)   Chuck Guzis
• Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's   SPC
• HP-UX 10.20 manuals   Eric Smith
• Migration from VAX 3100 to SIMH questions and looking for ideas   joe heck
• Copying in a real TU-58 one virtual TU-58 tape   Chris Elmquist
• Migration from VAX 3100 to SIMH questions and looking for ideas   Brian Wheeler
• Migration from VAX 3100 to SIMH questions and looking for ideas   Huw Davies
• Migration from VAX 3100 to SIMH questions and looking for ideas   Dave McGuire
• Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's   Josh Dersch
• Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's   steve shumaker
• Altos CPM and MPM disks   Jerry Wright
• Algol 68C For PDP-10   Rob Jarratt
• Kanbak-uino Arduino-based KENBAK-1 Recreation   Christian Corti
• Algol 68C For PDP-10   Huw Davies
• Algol 68C For PDP-10   Nigel Williams
• AW: Algol 68C For PDP-10   Gerhard Kreuzer
• Copying in a real TU-58 one virtual TU-58 tape   allison
• Algol 68C For PDP-10   Andy Holt
• Dave McGuire coming to da 'burgh   Keith Monahan
• Apple2gs emulation   Steven Hirsch
• Migration from VAX 3100 to SIMH questions and looking for ideas   Gene Buckle
• Apple2gs emulation   David Griffith
• oldest profession   Chris M
• John Romero to keynote KansasFest 2012   Ken Gagne
• Firmware library was Kaypro 4 CP/M disks   Tony Duell
• Machine code riddle (Fairchild Series 70 system)   Tony Duell
• Algol 68C For PDP-10   Rich Alderson
• Dave McGuire coming to da 'burgh   Rich Alderson
• HP-UX 10.20 manuals   Steve Robertson
• Algol 68C For PDP-10   Mike Loewen
• Firmware library was Kaypro 4 CP/M disks   Chuck Guzis
• Algol 68C For PDP-10   Rob Jarratt
• Apple2gs emulation   Steven Hirsch
• Algol 68C For PDP-10   Rob Jarratt
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Rich Alderson
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Adrian Graham
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   William Donzelli
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Alexandre Souza - Listas
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Gene Buckle
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   William Donzelli
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Rich Alderson
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Rich Alderson
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Brent Hilpert
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Gene Buckle
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   leaknoil
• [REWARD] Request for documentation   Bogdan Barbu
• Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle   Dave Caroline
• [REWARD] Request for documentation   Al Kossow

Last message date: Fri Sep 30 23:03:20 CDT 2011
Archived on: Sat Jan 19 16:06:18 CST 2013

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...