September 2011 Archives by thread
Starting: Thu Sep 1 02:24:48 CDT 2011
Ending: Fri Sep 30 23:03:20 CDT 2011
Messages: 1268
- RQDX3 DEVOFFLINE Problems
Rob Jarratt
- Apple II over-current issue
Mike van Bokhoven
- scarcity of digital preservation efforts - was Re: eBay... Yikes!
Toby Thain
- mess.org
Alexandre Souza - Listas
- Train shipping ( was Re: VT fixums )
Jonas Otter
- DEC GIGI (again)
Tony Duell
- Intel MDS available in SC
Alexey Toptygin
- SunOS booting woes (was Re: Looking for SunOS 4.1.* (sun3) cd image)
Josh Dersch
- scarcity of digital preservation efforts - was Re: eBay... Yikes! (Adrian Stoness)
Colin Eby
- Tony Sale passed
Jules Richardson
- TRS-80 Model II Digging
Nathan Pralle
- HP 7470A plotter -- repairing/replacing paper feed rollers
Philip Pemberton
- DiscFerret disc analysers for sale!
Philip Pemberton
- Early 3D rendition
Pontus
- WTB/Trade Tadpole/Sparc parts
Gavin Thomas Nicol
- Old printer tricks, HP LaserJet 6P
vintagecoder at aol.com
- What's 6 Feet Tall and Weighs 1,500 Pounds? A Minicomputer
Tony Duell
- What's 6 Feet Tall and Weighs 1,500 Pounds? A Minicomputer
Dave McGuire
- What's 6 Feet Tall and Weighs 1,500 Pounds? A Minicomputer
Ian King
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Al Kossow
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Jason McBrien
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Alexander Schreiber
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Alexander Schreiber
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
David Griffith
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Pete Turnbull
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Josh Dersch
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500Pounds?)
Vintage Coder
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Josh Dersch
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
David Griffith
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Jochen Kunz
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Dave McGuire
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
jim s
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
jim s
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
jim s
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Paul Anderson
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Adrian Stoness
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
TeoZ
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
TeoZ
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Toby Thain
- Current metal values (was What's 6 Feet Tall and Weighs 1,
Tony Duell
- Current metal values (was What's 6 Feet Tall and Weighs 1,
Chuck Guzis
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Mike Loewen
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
TeoZ
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
John Foust
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Mike Loewen
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Paul Anderson
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
William Donzelli
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Eric Smith
- Current metal values (was What's 6 Feet Tall and Weighs 1, 500 Pounds?)
Paul Anderson
- Difficulties of digital preservation - was Re: eBay... Yikes! (PDP-1 Handbook)
TeoZ
- cctalk Digest, Vol 97, Issue 5
Colin Eby
- Anyone interested in an AT&T 6300?
Dave McGuire
- Adding machine repair
Alexey Toptygin
- Looking for SunOS 4.1.* (sun3) cd image
Brian Wheeler
- TI CD 1400 Drive [for sale / offers]
Paxton Hoag
- Macintosh Programmers' Workshop - Fwd: MPW turns 25!
Toby Thain
- WANTED: More regional collectors
Michael B. Brutman
- Can anyone ID this machine?
Torfinn Ingolfsen
- DEC PWS 500au boot failure
Brian Wheeler
- RT-11 v2C Fortran
B M
- Need switch settings for...
Bill Sudbrink
- Difficulties of digital preservation - was Re: eBay... Yikes!
Tony Duell
- Original Prices of DEC Equipment
Toby Thain
- HP Moseley Plotter
William Donzelli
- P112 boot rom 5.1
David Griffith
- More house cleaning...
Paul Anderson
- at&t 3b1, pc7300
emanuel stiebler
- hp 9000/382
emanuel stiebler
- Wall Street Journal has an article about Paul Allen's Computer Museum
Lyle Bickley
- Free: Big CRTs in Chicago
Jason T
- 9762 Cray pack recovery
Al Kossow
- VAX 11/730 - free to good home - via comp.sys.dec
Toby Thain
- B-29 targeting computer
Brian Lanning
- Documentation for Clearpoint SNXRAM/12 VME board?
Earl D. Baugh Jr.
- Old Memorex Terminals
Tom Gardner
- via LisaList - Fwd: Original Lisa 1 for sale
Toby Thain
- DECstation 5000/120 bad power supply...
Brian Wheeler
- Looking asr33 interfacing AND NEMA crypto machine help in Ojai, California
B Degnan
- printers was: DiscFerret disc analysers for sale!
Jonas Otter
- Kilobaud Micro, October, November 1979?
Bill Sudbrink
- Interesting email addresses of old...
Mark Wickens
- Desoldering (Again)
Rob Jarratt
- Clearing out '90s PC stuff (UK)
Lawrence Wilkinson
- Timeworks Desktop Publisher and Textcraft
David Griffith
- Choosing a USB RS232 converter
David Griffith
- Not usual Kaypro
SPC
- Soldering stations - OKi-Metcal, Pace or something else?
Philip Pemberton
- Soldering stations - OKi-Metcal, Pace or something else?
Al Kossow
- Soldering stations - OKi-Metcal, Pace or something else?
emanuel stiebler
- Soldering stations - OKi-Metcal, Pace or something else?
Tony Duell
- Soldering stations - OKi-Metcal, Pace or something else?
Chuck Guzis
- Soldering stations - OKi-Metcal, Pace or something else?
Philip Pemberton
- Soldering stations - OKi-Metcal, Pace or something else?
Tony Duell
- Soldering stations - OKi-Metcal, Pace or something else?
Dave
- Soldering stations - OKi-Metcal, Pace or something else?
Eric Smith
- Soldering stations - OKi-Metcal, Pace or something else?
Chuck Guzis
- Soldering stations - OKi-Metcal, Pace or something else?
Tony Duell
- Soldering stations - OKi-Metcal, Pace or something else?
Dave
- Soldering stations - OKi-Metcal, Pace or something else?
Fred Cisin
- Soldering stations - OKi-Metcal, Pace or something else?
Tony Duell
- Soldering stations - OKi-Metcal, Pace or something else?
Philip Pemberton
- Soldering stations - OKi-Metcal, Pace or something else?
Tony Duell
- Soldering stations - OKi-Metcal, Pace or something else?
Dave
- Soldering stations - OKi-Metcal, Pace or something else?
Dave McGuire
- Soldering stations - OKi-Metcal, Pace or something else?
Bill Sudbrink
- Soldering stations - OKi-Metcal, Pace or something else?
Simon Fryer
- Soldering stations - OKi-Metcal, Pace or something else?
Dave
- Soldering stations - OKi-Metcal, Pace or something else?
jonas at otter.se
- FS (MA-USA): DEC Y SCSI, Alpha book--the paper kind, Konexx acoustic coupler, HP 1630D LA, DAT DDS3
J. Peterson
- 1970's AT&T Twin Towers Film
leaknoil
- Nixdorf 8810 M15
Tiina at FinnTrans
- Opening up an RD54 Disk
Rob Jarratt
- S-100 buffered prototyping board PCBs
Andrew Lynch
- cleaning and maintenance for an ASR33
Joe Giliberti
- AT&T unix PC
TeoZ
- HP, DEC, Olivetti & Apple stuff
E. Groenenberg
- HP, DEC, Olivetti & Apple stuff
SPC
- HP, DEC, Olivetti & Apple stuff
Rob Jarratt
- HP, DEC, Olivetti & Apple stuff
Bob Brown
- HP, DEC, Olivetti & Apple stuff
dwight elvey
- HP, DEC, Olivetti & Apple stuff
Glen Slick
- HP, DEC, Olivetti & Apple stuff
Tony Duell
- HP, DEC, Olivetti & Apple stuff
Brent Hilpert
- HP, DEC, Olivetti & Apple stuff
Tony Duell
- HP, DEC, Olivetti & Apple stuff
Christian Corti
- HP, DEC, Olivetti & Apple stuff
SPC
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- HP, DEC, Olivetti & Apple stuff
Glen Slick
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- HP, DEC, Olivetti & Apple stuff
Philipp Hachtmann
- HP, DEC, Olivetti & Apple stuff
SPC
- HP, DEC, Olivetti & Apple stuff
E. Groenenberg
- HP, DEC, Olivetti & Apple stuff
SPC
- HP, DEC, Olivetti & Apple stuff (Olivetti Programma 101)
jim s
- HP, DEC, Olivetti & Apple stuff
Philipp Hachtmann
- Is THAT what HP needs??
Fred Cisin
- Is THAT what HP needs??
Brian Wheeler
- Is THAT what HP needs??
Dave Caroline
- Is THAT what HP needs??
Tony Duell
- Is THAT what HP needs??
joe lobocki
- Is THAT what HP needs??
Chris M
- Is THAT what HP needs??
Tony Duell
- Is THAT what HP needs??
Chuck Guzis
- Is THAT what HP needs??
Dave McGuire
- Is THAT what HP needs??
Ian King
- Is THAT what HP needs??
Chuck Guzis
- Is THAT what HP needs??
John Foust
- Is THAT what HP needs??
Cameron Kaiser
- Is THAT what HP needs??
Toby Thain
- Is THAT what HP needs??
Ian King
- Is THAT what HP needs??
Tony Duell
- Is THAT what HP needs??
Chris M
- Is THAT what HP needs??
Tony Duell
- Is THAT what HP needs??
Chris M
- Is THAT what HP needs??
Tony Duell
- Is THAT what HP needs??
Alexandre Souza - Listas
- Is THAT what HP needs??
Tony Duell
- Is THAT what HP needs??
Curt at Atari Museum
- Is THAT what HP needs??
Dave McGuire
- Is THAT what HP needs??
Brian Wheeler
- Is THAT what HP needs??
SPC
- HP, DEC, Olivetti & Apple stuff
Stéphane Tsacas
- HP, DEC, Olivetti & Apple stuff
SPC
- HP, DEC, Olivetti & Apple stuff, and a true gem,,,
Jos Dreesen
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- DEC 4' Cabinet
Curt at Atari Museum
- HP, DEC, Olivetti & Apple stuff
Torfinn Ingolfsen
- HP, DEC, Olivetti & Apple stuff
Pontus
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- HP, DEC, Olivetti & Apple stuff
Al Kossow
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- HP, DEC, Olivetti & Apple stuff
Al Kossow
- HP, DEC, Olivetti & Apple stuff
Tony Duell
- HP, DEC, Olivetti & Apple stuff
Tony Duell
- HP, DEC, Olivetti & Apple stuff
Paul Anderson
- HP, DEC, Olivetti & Apple stuff
Tony Duell
- HP, DEC, Olivetti & Apple stuff
Dave McGuire
- HP, DEC, Olivetti & Apple stuff
Rod Smallwood
- What is DEC W9042 for
Pontus Pihlgren
- Seattle Retro-Computing Society's monthly meeting Saturday, September 17th, 2011
Glen Slick
- New rsync mirroring at trailing-edge.com
jim s
- Model M screws
David Griffith
- More DEC Bad luck.
Brian Wheeler
- DEC Floppy drive DS-53A
Chuck Guzis
- ASR 33 For Sale - Fully Restored
B Degnan
- GT44/46 brochures
Al Kossow
- Are the HP9100 and HP9810 calcualtors really RPN machines?
Tony Duell
- DEC VT330 and LK250s on Ebay
Dave Mitton
- mac software on ebay
Al Kossow
- IBM 3174-90R
SPC
- WTD: 0.156in 2x10 or 1x10 edge connector for Motorola/Displaytek M1000-355 CRT
Philip Pemberton
- MicroPLATO Pascal Course
SPC
- IBM Model M keyboard repair tip
Tony Duell
- RK05
Christian Corti
- TTI 8510 Manual and/or switch settings...
Lyle Bickley
- DEC Computer Lab workbook
Robert Fantinatto
- seeking ExperLisp by Expertelligence for Macintosh
Nigel Williams
- DEC GIGI - Power Supply Replacement Success
Mark Wickens
- Lots of Amiga stuff available
David Betz
- Installing OpenVMS Software
Glen Slick
- HP wish list
Mike Loewen
- EDA Electronics cards??? got a bag of them duno what they're from
Adrian Stoness
- intel mds 225
Adrian Stoness
- Repair Culture
Pontus Pihlgren
- ETH Lilith's on Ebay sold...
Jos Dreesen
- looking for a Tek Prism 3002
Chris M
- Stuff for Sale
Brian Wheeler
- OT: searching for Electrostatic Loudspeaker Design Cookbook
Bert Thomas
- Floodgap back up
Cameron Kaiser
- Microcolour terminal
Tony Duell
- push buttons w/ LED
Chris Elmquist
- Crossposting - Fwd: [rescue] SCSI/SCA/DLT/FC/etc Stuff needs new home [pick up in North Fort Worth TX]
Toby Thain
- [rescue] Stuff needs new home
Toby Thain
- update and pics of 11/785 and opps... slot machine
Paul Anderson
- NorthStar stuff for sale
Andrew Lynch
- RTE IV-B HP 7920 Grandfather and Primary system disc (NOS)
Rik Bos
- Wang 4000
Al Kossow
- TMA-11 Read
B M
- Stuff for sale/free (Seattle area)
Josh Dersch
- NTSC video output from Sinclair ZX81?
Charles Morris
- FS: Rack, Tape and Cassette drive for PDP in Boston area
Nick Allen
- SC Spreadsheet
David Coolbear
- Classic computing, the invesment of the future (aka. Inflation)
SPC
- OS/2
Liam Proven
- Kaypro 4 CP/M disks
Percy Walls
- Finding one IBM 2741
SPC
- P112 kits ship
David Griffith
- Google Circles
Stéphane Tsacas
- Copying in a real TU-58 one virtual TU-58 tape
SPC
- Tek 4170 load available near Seattle
Chuck Guzis
- looking for some RA60 drives
Dave McGuire
- HP Laserjet 4+ and Sun lunchboxes in Paris
Alex J.
- Western Digital datasheets wanted: WD1017, WD3256, app note for WD10C20
Eric Smith
- Motorola appnote AN-859 wanted (MC6829 MMU)
Eric Smith
- Apple2gs emulation
David Griffith
- Mac IIci's: save or scrap
Brent Hilpert
- cctalk Digest, Vol 97, Issue 56
Shoppa, Tim
- Multitech MPF-PC
Enrico Lazzerini
- Ferguson BigBoard I & Microcornucopia Magazine
Enrico Lazzerini
- 8" floppies
jim s
- Ontel 8" floppy disc drives cabinet
SPC
- Migration from VAX 3100 to SIMH questions and looking for ideas
joe heck
- Kanbak-uino Arduino-based KENBAK-1 Recreation
Christian Liendo
- Machine code riddle (Fairchild Series 70 system)
jim s
- Apple 2gs goodies
David Griffith
- Free for the cost of shiping : Altos CPM and MiocroSoft COBOL 8"disc's
Rik Bos
- HP-UX 10.20 manuals
Eric Smith
- Algol 68C For PDP-10
Rob Jarratt
- John Romero to keynote KansasFest 2012
Ken Gagne
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Rich Alderson
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Adrian Graham
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
William Donzelli
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Alexandre Souza - Listas
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
William Donzelli
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Gene Buckle
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Rich Alderson
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Gene Buckle
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
leaknoil
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Rich Alderson
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Brent Hilpert
- Sr. Server Engineer (Vintage Systems) at Living Computer Museum, Vulcan Inc., Seattle
Dave Caroline
- [REWARD] Request for documentation
Bogdan Barbu
Last message date:
Fri Sep 30 23:03:20 CDT 2011
Archived on: Sat Jan 19 16:06:18 CST 2013
This archive was generated by
Pipermail 0.09 (Mailman edition).