rictech at mail.com
Wed Dec 31 13:24:04 CST 2014
I just received a working Zorba CP/M computer, with no software. Does anyone have copies of the system disks? Would anyone be willing to make me a copy set of these disks? I would more than happy to pay for the disks and shipping. It would be wonderful to see the old computer up and running again.
NOTE: This electronic transmission (and/or the documents accompanying it) may contain confidential information belonging to the sender that is protected by the Electronic Communications Privacy Act, 18 U.S.C. Sections 2510 and 2521 and may be legally privileged. This message (and associated files) is intended only for the use of the individual to which it is addressed and may contain information that is confidential. This information contains research and personal and professional experiences of the sender. It is not intended as a substitute for consulting with a physician or other healthcare provider. Any attempt to diagnose and treat an illness should be done under the direction of a healthcare professional. If you are not the intended recipient you are hereby notified that any dissemination, copying or distribution of this message, or files associated with this message, is strictly prohibited. If you have received this communication in error, immediately destroy the original message. Although this email and any attachments are believed to be free of any virus or other defect it is the responsibility of the recipient to ensure that it is virus free, no responsibility is accepted by the sender.
> On Dec 31, 2014, at 5:47 AM, Johnny Billquist <bqt at update.uu.se> wrote:
>> On 2014-12-31 11:40, Holm Tiffe wrote:
>> David Brownlee wrote:
>>>> On 29 December 2014 at 00:31, emanuel stiebler <emu at e-bbes.com> wrote:
>>>>> On 2014-12-28 14:56, David Brownlee wrote:
>>>>> Björn Johannesson has been working on the VAX framebuffer and keyboard
>>>>> code in NetBSD to get X running on the LCG equipped machines (like the
>>>>> VAXstation 4000/VLC and 4000/60).
>>>>> He's expressed an interest in looking at some issues in the DECstation
>>>>> X11 code, but doesn't have access to an appropriate machine.
>>>> which DECstation, and which Graphic adapter?
>>>> There where quite a few different ones on the TURBOChannel,
>>>> from the very dumb frame buffer to the 3d ones ...
>>> My initial thoughts would be a nice little 3100 or possibly a 2100
>>> with the simple framebuffer, but obviously the goal would be to
>>> support whatever is available.
>> At least VS3100 M38 and M76 don't work with NetBSD, we realized this approx
>> a year before. Martin got a machine from me to investigate further, but I
>> think nothing has happened in this reagard since then.
> Uh... Holm... He was talking about a DECstation 2100 or 3100 here... Not a VAXstation. :-)
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
More information about the cctalk