Writing 8" floppies with SuperCard Pro
JoshD at LivingComputerMuseum.org
Tue Aug 11 19:53:45 CDT 2015
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Chuck Guzis
Sent: Tuesday, August 11, 2015 5:42 PM
To: General at classiccmp.org; Discussion@
Subject: Re: Writing 8" floppies with SuperCard Pro
> On 08/11/2015 05:27 PM, Josh Dersch wrote:
>> The issue is that upon reading back a disk that has been written via
>> the SuperCard, data is fine up until about cylinder 60, at which point
>> bad sectors start appearing more and more frequently (though most of
>> the data is still OK). I tried disabling TG43 just to see if it made
>> a difference, and it does - with TG43 disabled sectors written past
>> cylinder 43 read back as garbage.
>> I'm running short of ideas. Anyone else have any experience with this
>> combo? Any suggestions on troubleshooting tips?
> So what does the software do to compensate for bit crowding/shifting
> when writing to the inner cylinders? That is, what sort of write
> precompensation does it perform?
Absolutely no idea -- the manual isn't particularly technical and the SDK mentions nothing. I'll see if there's anything to be dug up in this regard. (Thanks also to Eric for suggesting this problem...)
More information about the cctalk