9-Track 1/2" Tape Drive Recommendations?

Jay Jaeger cube1 at charter.net
Sat Aug 22 12:07:25 CDT 2015


On 8/22/2015 5:32 AM, Brent Hilpert wrote:
> On 2015-Aug-21, at 10:20 PM, Ali wrote:
> 
> A brief conceptual overview:
> 
> Vacuum-column and spring-arm drives comprise 3 servo systems:
> 	- each reel motor is in a closed servo loop with position sensors in its associated vacuum column or spring arm.
> 	- the capstan motor, driving the exposed tape between the reels, is in a servo loop with a tape-speed sensor,
> 	  and externally controlled by commands for forward/reverse and speed selection.
> 
> The 3 servo systems are electrically independent (in control terms and leaving aside power supplies).
> The connection between them is the tape.
> 

One other type:  spring arm, where the tape reels do all the tape
moving, and a speed sensor, rather than a traditional capstan.  The
tension arm is part of the servo system to which the reel motors
respond.  In this case the reel motors and tension arm are anything but
independent.

Example:  HP 88780

JRJ


More information about the cctalk mailing list