Mark J. Blair
nf6x at nf6x.net
Fri Aug 28 12:55:05 CDT 2015
> On Aug 28, 2015, at 10:41 , Jon Elson <elson at pico-systems.com> wrote:
> The trick is to poke a tiny thermocouple into a plated through hole in one of the boards. Then, the controller is measuring actual temperature. I tried having the thermocouple in the air, and the boards got seriously fried.
I had planned to tape a thermocouple to the board, but putting it in a plated through hole seems like an even better idea. For my own board designs, I can make sure to include a hole of the right diameter for whatever thermocouple I use, at my best guess of an optimum point on the board to measure temperature.
Mark J. Blair, NF6X <nf6x at nf6x.net>
More information about the cctalk