11/23 clock issue
holm at freibergnet.de
Mon Feb 9 02:11:39 CST 2015
Eric Smith wrote:
> On Fri, Feb 6, 2015 at 12:44 AM, Holm Tiffe <holm at freibergnet.de> wrote:
> > You don't ned no pullup for +5. All open TTL inputs are reading High w/o
> > any pullup.
> That's partially correct for "real" TTL, but not for an CMOS "TTL",
> such as 74HC, HCT, AC, ACT, FC, FCT, BCT, LVC, etc. In other words,
> partially correct for "plain" 74xxx, 74L, 74H, 74S, 74LS, 74AS, 74ALS,
> 74F, but not many of the other "TTL" families which are actually CMOS.
> The reason I say "partially" is that an open TTL input has very poor
> noise immunity. From a DC perspective it is pulled high, but in
> practice noise pulses can easily be coupled into it. It has always
> been considered poor practices to leave TTL inputs open. And
> *extremely* poor practice for CMOS.
Whow. All this is related to an FOX Crytall Oscillator driving a 74S240 on
a M8186 Board?
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Straße 42, 09600 Oberschöna, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
More information about the cctalk