A 'good-enough' H960 |d|i|g|i|t|a|l| PDP11 masthead replica

Noel Chiappa jnc at mercury.lcs.mit.edu
Fri Jul 10 20:35:04 CDT 2015

PS: To clarify (if needed) what I mean by 'the flange': orient the piece as
it would be if it were on the H960 (i.e. with the little interior tabs at the
top, and the coloured panel on the front); the 'flange' runs down one side,
along the bottom, and up the other side: it's a continuous piece, towards the
back of the unit, in a plane parallel to the plane of the coloured front
panel. HTH.


More information about the cctalk mailing list