OpenVMS Alpha V7.3

Sean Caron scaron at umich.edu
Fri Jul 17 17:26:49 CDT 2015


Well, it took a little bit of monkeying around but I was able to get the
the V7.3 ISO I received from a helpful fellow list member to boot on my
3000/400 ... it seems to only like my RRD37 drive and only on the internal
SCSI channel ... she is finicky ... but hey, whatever gets the job done :O
Woo hoo! Off to load my first Alpha VMS machine! Thanks all!

Best,

San


On Fri, Jul 17, 2015 at 12:55 PM, william degnan <billdegnan at gmail.com>
wrote:

> thanks for the info.  The Alpha in question is a 2100 4/275.  It works
> enough to connect to the web but I need to fix one of the drives.
>
> On Fri, Jul 17, 2015 at 12:22 PM, John Willis <chocolatejollis38 at gmail.com
> >
> wrote:
>
> > On Fri, Jul 17, 2015 at 7:53 AM, william degnan <billdegnan at gmail.com>
> > wrote:
> >
> > > related question - I was not able to make a bootable/readable image
> from
> > > the ISO I have 7.3, although it might have been a bad source.  Is
> there a
> > > best way/ best software to make a usable 7.3 install CD that will work
> in
> > > an Alpha?   Just curious as to why I was not able to make it work.  I
> > make
> > > CD's all of the time from ISO, but maybe I need to do more research on
> > the
> > > subject as far as size and set up go for an Alpha-bootable CD, or CDRW
> > type
> > > I need to use, etc.   I'd offer my ISO, but I don't know if it's good.
> > > Bill
> > >
> >
> > Your Alpha system may not support reading burned CDs at all. I know mine
> > doesn't.
> >
>


More information about the cctalk mailing list