Emulex QD32

Christian Corti cc at informatik.uni-stuttgart.de
Mon Nov 2 07:56:59 CST 2015


On Mon, 2 Nov 2015, Christian Corti wrote:
> I wish it were true in my case. I don't even get it running under SIMH.
> Is it possible that the error is because of the monitor not seeing the QD32? 
> At least if I netboot NetBSD it doesn't see the QD32 either, only the RQDX3. 
[...]

Playing a bit with the QD32 I've found out that it has the "big" EPROM, 
i.e. the 27256 32kB ROM, and this one *includes* the diagnostic routines.

So there are the instructions how to enter the built-in routines:

U
I
D/P/W 20001F40 20
D/P/L 20088000 80000000
D/P/L 20088004 80000001
D/P/W 200000EC 1
D/P/W 200000EE 3003
D * 4401
S 80

And here we go:

Firmware-Resident Diagnostic
Copyright (c) 1988 Emulex Corporation all rights reserved

QD32 controller, firmware revision level K
IP address = 160354

            Option menu
1  - Self Test Loop
2  - Format
3  - Verify
4  - Format and Verify
5  - Data Reliability Test
6  - Format, Verify, and Data Reliability Test
7  - Read Only Test
8  - List Known Units
9  - Replace Block
10 - Display Novram
11 - Edit / Load Novram

   Enter option number:


Christian


More information about the cctalk mailing list