cctalk Digest, Vol 26, Issue 29
anders.k.nelson at gmail.com
Mon Aug 29 13:55:12 CDT 2016
Hey Rob (and anyone else sniffing signals),
I've been using a USB logic analyzer from Saleae (https://www.saleae.com/)
for years now and the software is really good. Way cheaper than a
standalone unit. I'm unsure if the inputs can handle more than 5v but you
could throw a divider network in front and try it.
Also there's the Digilent Analog Discovery (
https://www.sparkfun.com/products/13929) which does the same stuff but I
can't vouch for the software as I've never used it. Inputs can handle
+1 (517) 775-6129
> ---------- Forwarded message ----------
> From: Rob Jarratt <robert.jarratt at ntlworld.com>
> To: "'Paul Koning'" <paulkoning at comcast.net>, <rob at jarratt.me.uk>,
> "'General Discussion: On-Topic and Off-Topic Posts'" <
> cctalk at classiccmp.org>
> Date: Mon, 29 Aug 2016 17:33:56 +0100
> Subject: RE: DEC Pro 350/380 Memory Cards - Interchangeability?
> > -----Original Message-----
> > From: Paul Koning [mailto:paulkoning at comcast.net]
> > Sent: 29 August 2016 15:08
> > To: rob at jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
> > <cctalk at classiccmp.org>
> > Subject: Re: DEC Pro 350/380 Memory Cards - Interchangeability?
> > > On Aug 28, 2016, at 5:11 PM, Rob Jarratt <robert.jarratt at ntlworld.com>
> > wrote:
> > >
> > > I have a 350 and 380. Neither work. The 380 is reporting a possible
> > > memory error on the LEDs. Will the 350's memory work in a 380 (or vice
> > versa)?
> > The 380 has memory on the motherboard, and a model-specific
> > daughtercard for expansion memory.
> > It seems reasonable that the Pro bus (I/O card) expansion memory should
> > work in both models, but I don't have any to try that.
> > If you have a 380 complaining about memory and it has a Pro bus memory
> > card installed, I'd suggest removing that card to see if it's happy with
> just the
> > stock motherboard memory.
> > paul
> Just reading your reply again. Are you saying it has enough memory on the
> board, without using a daughter board? I did see lots of memory on the main
> board, but assumed it was video memory. I did try removing the daughter
> board altogether at one point, but it still didn't work. :-(
> I wish I had a logic analyser.
More information about the cctalk