HP1631D Logic Analyzer..Software???
glen.slick at gmail.com
Sat Dec 3 15:42:52 CST 2016
On Sat, Dec 3, 2016 at 12:13 PM, Holm Tiffe <holm at freibergnet.de> wrote:
> Hi folks,
> I have an HP1631D Logic Analyzer for some years now und got an HP9121
> dual Floppy drive that fits to it yesterday.
> I've tested the drive, formating disks, storing and reading data ist
> working :-)
> While reading the Users Manual of the LA I've found out that besides of
> storing setup- and configuration data on the disk, there should some
> loadable disassemblers for the HP1631D exist on floppies..
> The Logic Analyzer is very limited from todays point of view but for
> example an Z80 disassembler where nice to have.
> Has someone out here such disassemblers (Z180, 8085, 8080, 6809 etc)
> for the HP1631D?
I have a 3.5-inch floppy part number 10342-13012 for the 10342B Bus
Preprocessor (HP-IB, RS-232C/V.24, RS-449) for HP1630A/D/G and 1631A/D
logic analyzers. I'll have to create an ImageDisk dump of that floppy.
I also have a tape somewhere if I can find it that is probably for the
either the 6800/6802 10307B (64672B) or 6809/6809E 10308B (64671A)
preprocessor if I remember correctly. I don't have an 82161A HP-IL
tape drive to try to read and dump that tape. If I find that tape I
should send it to someone with a working 82161A HP-IL tape drive and
the means to dump and archive that tape.
More information about the cctalk